Free Delivery on all orders over £99*

COB LED Strip 10W/m 24V Cuttable Reel 50m - Warm White

£22099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip lights a room as a continuous, dot-free line rather than the spaced points you see on older tape. Each metre draws 10W and gives 920 lumens of warm white (3000K) light, so a run reads as one even glow with no visible diodes along its length. Sold in the US as led tape light, it ships on a flexible 50m reel that can be trimmed to fit the job, with cut points marked every 5cm. The high Ra90 colour rendering keeps wood tones, paint and worktops looking true under it.

The even, glare-free output suits cove and pelmet runs, under-cabinet lighting in a kitchen, shelf and display lighting, and accent lines along skirtings or stair stringers. Because the light is dot-free, it works well where the strip sits close to a surface or where the diffused line itself is on show. The IP00 rating means this is a dry indoor product only, so keep it clear of bathrooms, kitchens splash zones, porches and any outdoor or damp position. For longer spans, plan the layout around the 5cm cut interval and the reachable cut points so each section meets a neat join.

The diodes are mounted on a flexible reel that bends around shallow corners and follows curved profiles. It runs on 24V DC, so it is not a mains-direct product and needs a matching 24V LED driver, which is supplied separately and sized to the total wattage of the run you cut. Rated at 30,000 hours, the strip cuts only at the marked 5cm points and should not be cut elsewhere. Our range also includes the drivers and aluminium profiles that finish a run cleanly.

Specification
Power 10 W/m
Luminous flux 920 lm/m
Efficiency 92 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 5 cm
Reel length 50 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a separate driver?

Yes. It runs on 24V DC, not straight from the mains, so it needs a matching 24V LED driver. The driver is supplied separately and should be sized to the total wattage of the length you cut, allowing 10W for every metre in the run.

Where can the strip be cut?

The strip is cut-to-length at the marked points, which fall every 5cm along the reel. Only cut at those marks, never between them, so the circuit on each section stays intact. From a single 50m reel you can make up several runs to suit different parts of a room.

Can this be used outdoors or in a bathroom?

No. This version is rated IP00, which means dry indoor use only. Keep it out of bathrooms, kitchen splash zones, porches and any outdoor or damp location. For sheltered or damp areas you would need a coated IP65 strip instead.

How do I clean the strip once installed?

Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid soaking the strip or using solvents, and take care around the cut ends and connectors. Mounting the run inside an aluminium profile makes dusting easier and protects the diodes.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip lights a room as a continuous, dot-free line rather than the spaced points you see on older tape. Each metre draws 10W and gives 920 lumens of warm white (3000K) light, so a run reads as one even glow with no visible diodes along its length. Sold in the US as led tape light, it ships on a flexible 50m reel that can be trimmed to fit the job, with cut points marked every 5cm. The high Ra90 colour rendering keeps wood tones, paint and worktops looking true under it.

    The even, glare-free output suits cove and pelmet runs, under-cabinet lighting in a kitchen, shelf and display lighting, and accent lines along skirtings or stair stringers. Because the light is dot-free, it works well where the strip sits close to a surface or where the diffused line itself is on show. The IP00 rating means this is a dry indoor product only, so keep it clear of bathrooms, kitchens splash zones, porches and any outdoor or damp position. For longer spans, plan the layout around the 5cm cut interval and the reachable cut points so each section meets a neat join.

    The diodes are mounted on a flexible reel that bends around shallow corners and follows curved profiles. It runs on 24V DC, so it is not a mains-direct product and needs a matching 24V LED driver, which is supplied separately and sized to the total wattage of the run you cut. Rated at 30,000 hours, the strip cuts only at the marked 5cm points and should not be cut elsewhere. Our range also includes the drivers and aluminium profiles that finish a run cleanly.

    Specification
    Power 10 W/m
    Luminous flux 920 lm/m
    Efficiency 92 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 5 cm
    Reel length 50 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a separate driver?

    Yes. It runs on 24V DC, not straight from the mains, so it needs a matching 24V LED driver. The driver is supplied separately and should be sized to the total wattage of the length you cut, allowing 10W for every metre in the run.

    Where can the strip be cut?

    The strip is cut-to-length at the marked points, which fall every 5cm along the reel. Only cut at those marks, never between them, so the circuit on each section stays intact. From a single 50m reel you can make up several runs to suit different parts of a room.

    Can this be used outdoors or in a bathroom?

    No. This version is rated IP00, which means dry indoor use only. Keep it out of bathrooms, kitchen splash zones, porches and any outdoor or damp location. For sheltered or damp areas you would need a coated IP65 strip instead.

    How do I clean the strip once installed?

    Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid soaking the strip or using solvents, and take care around the cut ends and connectors. Mounting the run inside an aluminium profile makes dusting easier and protects the diodes.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.