Free Delivery on all orders over £99*

COB LED Strip 10W/m 24V Cool White - 50m Reel

£22099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes mounted on a flexible reel, so the light reads as one smooth band rather than a row of visible points. It draws 10W per metre and gives 1000 lumens per metre of 4000K cool white light, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Sold across the Atlantic as LED tape light, it suits anyone wanting a clean, even line of brightness. The strip runs on 24V DC, so it pairs with a matching 24V LED driver and is not wired straight to the mains.

The 50 metre reel covers long runs such as under-cabinet lines in a kitchen, cove and ceiling perimeter detailing, shelving, display joinery and stair-edge accents. Because the output is a continuous grazing line rather than a downward room light, it works best as accent and task-edge lighting close to the surface it sits on, washing along worktops, shelf undersides and recesses. It carries an IP00 rating, which means it is for dry indoor positions only, so keep it clear of bathrooms, porches and any outdoor or damp location. The reel cuts to length at marked points every 5cm, letting you tailor each section to the cabinet, shelf or alcove it lines.

Built on a slim flexible carrier just 8mm wide, the strip bends around corners and follows curved profiles where a rigid fitting will not. It needs a separately specified 24V DC LED driver sized to the total run, and the strip cuts only at the printed 5cm intervals to keep each segment working. The rated lifespan is 30,000 hours, and the cool white tone gives a crisp, neutral light well suited to work and display areas. This range also includes matching profiles and drivers to complete an installation.

Specification
Power 10 W/m
Luminous flux 1000 lm/m
Efficiency 100 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 5 cm
Reel length 50 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, so it requires a matching 24V LED driver rather than a direct mains connection. Choose a driver rated to carry the total wattage of the length you install, allowing some headroom above the strip's 10W per metre draw.

Can the strip be cut to length, and where?

Yes. The reel can be cut to length at the marked points every 5cm. Always cut on the printed line so each section keeps its circuit intact; cutting between marks will leave a dead segment.

Is it suitable for outdoor or bathroom use?

No. This strip carries an IP00 rating, which means it is intended for dry indoor positions only. Keep it out of bathrooms, porches and any outdoor, wet or damp location where moisture could reach the diodes.

What is the best way to clean it?

Switch off and let the strip cool, then wipe it gently with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, and take care around the cut ends and driver connections so no moisture gets into the circuit.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes mounted on a flexible reel, so the light reads as one smooth band rather than a row of visible points. It draws 10W per metre and gives 1000 lumens per metre of 4000K cool white light, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Sold across the Atlantic as LED tape light, it suits anyone wanting a clean, even line of brightness. The strip runs on 24V DC, so it pairs with a matching 24V LED driver and is not wired straight to the mains.

    The 50 metre reel covers long runs such as under-cabinet lines in a kitchen, cove and ceiling perimeter detailing, shelving, display joinery and stair-edge accents. Because the output is a continuous grazing line rather than a downward room light, it works best as accent and task-edge lighting close to the surface it sits on, washing along worktops, shelf undersides and recesses. It carries an IP00 rating, which means it is for dry indoor positions only, so keep it clear of bathrooms, porches and any outdoor or damp location. The reel cuts to length at marked points every 5cm, letting you tailor each section to the cabinet, shelf or alcove it lines.

    Built on a slim flexible carrier just 8mm wide, the strip bends around corners and follows curved profiles where a rigid fitting will not. It needs a separately specified 24V DC LED driver sized to the total run, and the strip cuts only at the printed 5cm intervals to keep each segment working. The rated lifespan is 30,000 hours, and the cool white tone gives a crisp, neutral light well suited to work and display areas. This range also includes matching profiles and drivers to complete an installation.

    Specification
    Power 10 W/m
    Luminous flux 1000 lm/m
    Efficiency 100 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 5 cm
    Reel length 50 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, so it requires a matching 24V LED driver rather than a direct mains connection. Choose a driver rated to carry the total wattage of the length you install, allowing some headroom above the strip's 10W per metre draw.

    Can the strip be cut to length, and where?

    Yes. The reel can be cut to length at the marked points every 5cm. Always cut on the printed line so each section keeps its circuit intact; cutting between marks will leave a dead segment.

    Is it suitable for outdoor or bathroom use?

    No. This strip carries an IP00 rating, which means it is intended for dry indoor positions only. Keep it out of bathrooms, porches and any outdoor, wet or damp location where moisture could reach the diodes.

    What is the best way to clean it?

    Switch off and let the strip cool, then wipe it gently with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, and take care around the cut ends and driver connections so no moisture gets into the circuit.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.