Description
An amber LED lamp on an E27 fitting, made to be looked at rather than tucked out of sight. It draws 4W and gives an extra warm 2100K light, far closer to the glow of an old filament lamp than to a modern warm white, and the amber finish deepens it further. The output is deliberately gentle, so think of it as light you sit beside rather than light you read by. It dims on a suitable LED dimmer, dropping to a low ember without the colour going thin or grey.
We would use this anywhere the lamp itself is on show: a bare flex drop over an island, a cluster above a dining table, an open cage pendant, or a wall light with little in the way of a shade. It earns its keep in bars, snugs, dining rooms and hallways, wherever the point is atmosphere after dark rather than working brightness. At 330mm it is a long lamp with real presence, so picture the whole of it hanging before you commit to a fitting, and allow room beneath it. Run several along a table and the warmth builds nicely.
The amber runs the full length of the lamp and reads as soft honey even when the power is off. To clean it, switch off at the wall, let it cool right down, then wipe over with a dry lint-free cloth, holding it by the cap rather than the body; no sprays and nothing abrasive. It carries a three year warranty. This is one we reach for when a fitting has been chosen for its shape as much as its light, because the lamp becomes part of the look instead of something to be screened off. If you already have a dimmer in the circuit, check it is rated for LED lamps before you fit.
Specification
| Colour |
Amber |
| Weight |
0.25KG |
| Diameter |
75mm |
| Height |
330mm |
| Materials Used |
Glass, Metal |
| Lamp Cap |
E27 |
| Colour Temperature |
2100K Extra Warm White (±5%) |
| Number of Switching Cycles |
100000 |
| Conventional Lamp Equiv. |
20W (±5%) |
| Shape of Lamp |
Designer |
| Type of LED |
Filament |
| Beam Angle |
360° |
| System Flux |
200lm (±5%) |
| CRI |
>80 |
| Ta |
-20° to +40°C |
| Total Power Consumption |
4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Dimmer Included |
No |
| Average Life |
15000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Country of Origin |
China |
Frequently Asked
Will it work with any dimmer?
It needs a dimmer suitable for LED lamps. A dimmer is not supplied with the lamp, and older trailing-edge or mains-voltage dimmers meant for filament lamps may flicker or buzz.
How bright is it?
It gives 200 lumens, which is a decorative level of light rather than task lighting. Use it where you want glow and warmth, or fit several together if you need more from a single fitting.
What size is it?
The lamp measures 75mm across and 330mm from cap to tip, so it is noticeably longer than a standard household lamp.
How warm is the light?
At 2100K it is an extra warm, amber-tinted light, deeper and more golden than the usual 2700K warm white.
How long should it last?
It is rated at 15,000 hours of average life and carries a three year warranty.
Can I use it outside?
No. It is intended for dry indoor rooms and enclosed fittings on a normal household supply.