Description
A decorative LED on a standard screw cap, this one is drawn tall and slim so the lamp itself carries the look rather than hiding inside a shade. The smoked finish mutes the light and leaves a soft amber core showing when it is lit. At 2100K the colour sits deeper than ordinary warm white, nearer candle glow than daylight, and the output is gentle by design: this is a lamp to be looked at, not one to light a worktop by. It dims, provided the circuit has a dimmer suited to LED.
We reach for lamps like this where the fitting puts the lamp on show: a bare flex pendant, an open cage, a cluster over a dining table, or a shadeless wall light. It earns its place in snugs, bars, hallways and bedrooms, anywhere a low pool of warm light is worth more than brightness. Where you need to read or work, we would pair it with something brighter close by and let this one hold the mood. At 330mm it is a long lamp, so allow for that length hanging below the fitting.
Construction is simple: the smoked outer sits over the LED assembly and finishes into a screw cap, with no visible hardware to spoil the line. To keep it looking right, switch off at the socket, let it cool, then wipe it over with a dry lint free cloth. Sprays and solvents will mark the smoked surface, so leave them in the cupboard. It draws 4W and carries a three year warranty. We sell it as a single lamp rather than a set, and to our eye it works hardest repeated along a run of pendants, where the full length of each one is on view.
Specification
| Colour |
Smoked |
| Weight |
0.24KG |
| Diameter |
75mm |
| Height |
330mm |
| Materials Used |
Glass, Metal |
| Lamp Cap |
E27 |
| Colour Temperature |
2100K Extra Warm White (±5%) |
| Average Life of Lamp (hrs) |
15000hrs |
| No. of Switching Cycles |
100000 |
| Conventional Lamp Equiv. (W) |
20W (±5%) |
| Shape of Lamp |
Designer |
| Type of LED |
Filament |
| Beam Angle (°) |
360° |
| System Flux (lm) |
120lm (±5%) |
| CRI |
>80 |
| Ta (°C) |
-20° to +40°C |
| Total Power Consumption (W) |
4W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Dimmer Included |
No |
| Average Life (hrs) |
15000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Country of Origin |
China |
Frequently Asked
Will it work with the dimmer I already have?
It dims only on a dimmer suited to low wattage LED. A dimmer is not supplied, and older mains dimmers built for filament lamps can cause flicker or a limited dimming range.
How bright is it?
It gives 120 lumens from 4W, which is a decorative level of light rather than a room-filling one. Use it where the lamp is meant to glow, or in multiples if you need more light overall.
What are the dimensions?
It measures 75mm across and 330mm tall, on an E27 screw cap, and weighs 0.24kg.
What does 2100K look like in the room?
It is an extra warm, amber tone, deeper and softer than a standard warm white lamp, with a colour rendering index above 80.
How long should it last?
Average rated life is 15,000 hours. Frequent switching and running it at the very bottom of a dimmer's range can shorten that.
How should I clean it?
Switch off at the socket and let the lamp cool, then dust it with a dry lint free cloth. Keep water, polish and solvents away from the smoked surface.