Description
Here is a decorative LED lamp made to be looked at rather than hidden away, tall and generously proportioned, with a smoked finish running the full length of it. The tint takes the edge off the output, so what reaches the room is a low amber glow at 2100K rather than anything bright or clinical. It draws 4W, screws into an E27 lampholder, and can be dimmed where a suitable dimmer is in place.
We would use it where the lamp itself is the point: on a bare flex over a dining table, in a run down a stairwell, inside an open frame shade, or above a bar or counter where the silhouette can be read against a dark wall. The light it gives is deliberately modest, so treat it as atmosphere rather than a working light for reading or chopping, and put something brighter nearby if the room has real jobs to do. At around 32cm from cap to tip it wants a little air about it, which makes it happier on a long drop than tucked under a low shade.
The smoke tone carries across the whole body, so it still looks considered when it is switched off, and the cap is the familiar screw type. Switch off and let it go cold before cleaning, then a soft dry cloth is all it asks for; sprays, solvents and damp cleaners are best kept well away from it. It carries a three year warranty. We tend to reach for it as a single feature lamp, though it looks its best repeated at staggered heights on plain flex, where the smoked bodies read as a set of soft shadows instead of a row of hard points.
Specification
| Colour |
Smoked |
| Weight |
0.18KG |
| Diameter |
125mm |
| Height |
325mm |
| Materials Used |
Glass, Metal |
| Lamp Cap |
E27 |
| Colour Temperature |
2100K Extra Warm White (±5%) |
| Number of Switching Cycles |
100000 |
| Conventional Lamp Equiv. |
20W (±5%) |
| Shape of Lamp |
Designer |
| Type of LED |
Filament |
| Beam Angle |
360° |
| System Flux |
120lm (±5%) |
| CRI |
>80 |
| Ta |
-20° to +40°C |
| Total Power Consumption |
4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Dimmer Included |
No |
| Average Life |
15000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Country of Origin |
China |
Frequently Asked
What are its dimensions?
It measures 125mm in diameter and 325mm in height, and weighs 0.18kg, so it reads as an oversized decorative lamp rather than a standard household one.
Will it work on my dimmer?
It is dimmable, but it needs a dimmer suited to low wattage LED lamps. No dimmer is supplied with it.
How much light does it give?
Around 120 lumens at 2100K, which is an extra warm, amber light. That is decorative brightness for mood and detail, not task lighting.
What lampholder does it need?
A standard E27 screw lampholder, running on a 220 to 240V domestic supply.
How long should it last?
Average life is rated at 15,000 hours, and it carries a three year warranty.
Can I clean the smoked finish?
Yes, once it is switched off and completely cold. Use a dry, soft cloth only and avoid any liquid or chemical cleaner.