Description
This is a decorative LED lamp in the classic teardrop shape, drawn out tall so the shoulders and neck stay in view below a shade. The finish is amber, which warms the light before it leaves the lamp and takes the hard edge off the LED. At 2100K the tone sits well below ordinary warm white, closer to candlelight than to daylight, and a low 4W draw keeps it gentle rather than bright. It dims, provided the circuit has a dimmer suited to LED, and it turns down without losing that amber cast.
We reach for this where the lamp itself is meant to be seen: open pendants, cage fittings, a run above a kitchen island, or a cluster hung at different heights over a stairwell. It gives an evening light rather than a working one, so we would pair it with brighter task lighting in a kitchen or study and let this carry the mood after dark. In bars, snugs and dining rooms it does the job on its own. At 32cm tall it needs a fitting with the room to show it off.
Light spreads all round rather than being thrown forward, so it works as happily in an upright holder as in a pendant hung cap down. Amber is the only finish we carry it in, and we think it sits best with brass, bronze and smoked glass fittings. Keep it clean by switching off at the wall, letting it come down to room temperature, then lifting dust with a dry microfibre cloth; no sprays, and nothing wet near the cap. It carries a three year warranty. A dimmer is not supplied with it.
Specification
| Colour |
Amber |
| Weight |
0.18KG |
| Diameter |
125mm |
| Height |
325mm |
| Materials Used |
Glass, Metal |
| Lamp Cap |
E27 |
| Colour Temperature |
2100K Extra Warm White (±5%) |
| Number of Switching Cycles |
100000 |
| Conventional Lamp Equiv. |
20W (±5%) |
| Shape of Lamp |
Designer |
| Type of LED |
Filament |
| Beam Angle |
360° |
| System Flux |
120lm (±5%) |
| CRI |
>80 |
| Ta |
-20° to +40°C |
| Total Power Consumption |
4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Dimmer Included |
No |
| Average Life |
15000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Country of Origin |
China |
Frequently Asked
How big is it?
It measures 125mm across at its widest point and 325mm in overall height, so check the drop and shade opening of your fitting before ordering.
What sort of dimmer does it need?
A dimmer rated for LED loads. Older resistive dimmers made for filament lamps often cause flicker or a limited dimming range, and no dimmer is included.
How warm is the light?
2100K, described as extra warm white. It is a deep golden tone, noticeably warmer than the 2700K lamps most people are used to.
Does the amber finish reduce the light output?
Yes. The tint is part of the effect, so treat this as a lamp you look at rather than one you read by, and add task lighting where you need brightness.
How long should it last?
It is rated at an average life of 15,000 hours, with dimming and good ventilation around the lamp both helping it get there.
Will it fit a standard screw holder?
Yes, it takes the usual E27 screw cap found on most pendants, table lamps and floor lamps sold in the UK.