Description
This is a small round recessed light with a flat matt white bezel and a COB LED behind the lens, drawing 7W and giving a neutral-cool 4000K light. The beam is tight and directional rather than broad, so the light lands where you point it and reads crisply on worktops, tiles and stone. It drops into a 75mm cut-out, and the driver comes in the box. Output is fixed, so it wires to an ordinary switch rather than a dimmer.
We reach for these where a room needs plenty of clean light from a quiet ceiling: kitchens, utility rooms, shower rooms, cloakrooms and hallways. The housing resists splashing water and dust, so it copes with steam above a bath or a hob without fuss. It suits anyone after a tidy ceiling with no visible hardware beyond a flat white ring, and it works well in rows over a run of units or in pairs either side of a mirror. We would keep the spacing even and the beams off the walls.
The body is finished in matt white throughout, a low sheen that sits close to ordinary ceiling paint and does not flash under its own light. Keeping it looking right is simple: with the power off and the fitting cool, take dust off the rim and the lens with a soft cloth, and keep sprays and scouring pads well away. The LED is built in, so there is no lamp to swap. It carries a three year warranty. We also stock the same fitting in a warmer white, which is the one we would choose for bedrooms and sitting rooms.
Specification
| Colour |
Matt White |
| Weight |
0.46KG |
| Diameter |
84mm |
| Height |
70mm |
| Cut Out |
75mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
CREE |
| LED Power |
7W (±5%) |
| Type of LED |
COB |
| Lumens per LED |
70-75lm |
| Lumens per Watt (lm/W) |
91lm/W (±5%) |
| Beam Angle |
24° |
| System Flux |
640lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
700mA |
| Min/Max. Voltage Output |
5-10V |
| Load Range |
7W |
| Ta |
60°C |
| Tc |
90°C |
| Casing Material |
PC |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 75mm. The visible bezel measures 84mm across, so it covers the opening with a small margin all round.
How deep is the fitting?
The body stands 70mm tall behind the bezel, and the supplied driver needs room alongside it in the ceiling void.
Can I put it on a dimmer?
No. This version is non-dimmable and should be run from a standard on/off switch.
What sort of light does it give?
A neutral-cool 4000K white at 640 lumens from 7W, in a narrow beam that is good for task areas and for picking out surfaces.
Is it suitable for a bathroom or shower room?
Yes, it is rated for splashing water and dust, which covers general bathroom ceilings. Zones within a shower enclosure should be confirmed with your electrician.
Does the LED need replacing?
The LED is integrated rather than a changeable lamp, so nothing needs swapping in normal use.