Free Delivery on all orders over £99*

Cadris LED Small Square Alabaster Flush Ceiling Light - Soft White & Brushed Brass

£1,49999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Trade Discount Available
Description

The Cadris is a 400mm square flush ceiling light built around a solid panel of natural Spanish alabaster, fixed to the ceiling with four brushed brass screw caps at the corners. An integrated LED behind the stone runs at 3000K on 230V mains, and the alabaster itself acts as the diffuser, casting warm, even light through the panel rather than from a visible bulb.

At just 50mm deep, the Cadris is designed for ceilings where a low-profile fitting is needed: hallways, landings, kitchens, bedrooms and bathrooms with limited headroom, or rooms where a pendant or semi-flush would feel too dominant. The flush mount sits directly against the ceiling with no drop, which makes it a workable answer for the 'ceiling lights for low ceilings' problem in older properties and converted spaces with beams or sloped soffits above.

Each alabaster panel is cut from natural stone, so the veining, mineral patterning and tonal variation differ between individual pieces — under the LED, those patterns become visible as the warm light passes through the translucent stone. The brushed brass screw caps at the four corners introduce a warm metallic contrast against the pale alabaster and give the square geometry a defined edge. Combined diameter is 400mm, which suits rooms of around 6-10m² as a primary light source or larger rooms as part of a multi-fitting layout.

Specification
Material Brass & Natural Spanish Alabaster
Finish Soft White & Brushed Brass
Height 50mm
Diameter 400mm
Lamp Socket Integrated LED
Colour Temperature 3000K
Voltage 230V
Weight -
Warranty 2 Year
Frequently Asked

Is the Cadris suitable for low ceilings?

Yes. The 50mm profile sits flush against the ceiling with no drop, which makes it a practical choice for rooms with ceiling heights below 2.4m, under-stair landings, attic conversions and spaces with structural beams.

Can it be used in a bathroom?

An IP rating is not stated for this fitting, so it should not be installed in bathroom Zones 0, 1 or 2 where direct water contact is possible. It can be used in Zone 3 or in a bathroom outside the zoned areas, subject to a qualified electrician's assessment.

Does each piece look the same?

No. Each Cadris uses a panel of natural Spanish alabaster, and the veining, tonal variation and mineral patterning differ between individual pieces. Variation in the stone is part of the material, not a defect.

How is it fitted?

The Cadris is a flush ceiling fitting wired into a standard UK 230V mains supply and should be installed by a qualified electrician. The four brushed brass corner screws secure the alabaster panel to the ceiling-mounted base.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Our materials

Natural Spanish alabaster

Each piece is carved from natural Spanish alabaster, so the veining and tone are unique to your light. No two are the same.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Covered by our warranty.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Cadris is a 400mm square flush ceiling light built around a solid panel of natural Spanish alabaster, fixed to the ceiling with four brushed brass screw caps at the corners. An integrated LED behind the stone runs at 3000K on 230V mains, and the alabaster itself acts as the diffuser, casting warm, even light through the panel rather than from a visible bulb.

    At just 50mm deep, the Cadris is designed for ceilings where a low-profile fitting is needed: hallways, landings, kitchens, bedrooms and bathrooms with limited headroom, or rooms where a pendant or semi-flush would feel too dominant. The flush mount sits directly against the ceiling with no drop, which makes it a workable answer for the 'ceiling lights for low ceilings' problem in older properties and converted spaces with beams or sloped soffits above.

    Each alabaster panel is cut from natural stone, so the veining, mineral patterning and tonal variation differ between individual pieces — under the LED, those patterns become visible as the warm light passes through the translucent stone. The brushed brass screw caps at the four corners introduce a warm metallic contrast against the pale alabaster and give the square geometry a defined edge. Combined diameter is 400mm, which suits rooms of around 6-10m² as a primary light source or larger rooms as part of a multi-fitting layout.

    Specification
    Material Brass & Natural Spanish Alabaster
    Finish Soft White & Brushed Brass
    Height 50mm
    Diameter 400mm
    Lamp Socket Integrated LED
    Colour Temperature 3000K
    Voltage 230V
    Weight -
    Warranty 2 Year
    Frequently Asked

    Is the Cadris suitable for low ceilings?

    Yes. The 50mm profile sits flush against the ceiling with no drop, which makes it a practical choice for rooms with ceiling heights below 2.4m, under-stair landings, attic conversions and spaces with structural beams.

    Can it be used in a bathroom?

    An IP rating is not stated for this fitting, so it should not be installed in bathroom Zones 0, 1 or 2 where direct water contact is possible. It can be used in Zone 3 or in a bathroom outside the zoned areas, subject to a qualified electrician's assessment.

    Does each piece look the same?

    No. Each Cadris uses a panel of natural Spanish alabaster, and the veining, tonal variation and mineral patterning differ between individual pieces. Variation in the stone is part of the material, not a defect.

    How is it fitted?

    The Cadris is a flush ceiling fitting wired into a standard UK 230V mains supply and should be installed by a qualified electrician. The four brushed brass corner screws secure the alabaster panel to the ceiling-mounted base.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.