Description
The Briller is a 31cm wide wall light built around a central white diffuser surrounded by a dense cluster of clear acrylic spheres held on a chrome wire frame. An integrated 12W LED at 3000K sits behind the diffuser, casting warm light outward through the spheres so each acts as a small lens, refracting points of light onto the surrounding wall.
At 31cm wide, 19.5cm tall and 18cm deep, the Briller suits feature walls in living rooms, bedrooms and hallways where a decorative fitting is wanted without the projection of a larger sconce. The fitting mounts to a standard UK wall back box and the chrome frame conceals the cable entry. Pairing two units either side of a bed or along a hallway creates a repeated pattern of light play across the wall surface.
The acrylic spheres are graded in size and tightly packed around the central diffuser, giving the fitting a sculpted, almost beaded appearance when unlit. When the LED is on, the central diffuser glows softly white while the outer spheres pick up and scatter highlights, producing a different effect from cut crystal — softer, more uniform, and without the sharp prismatic facets glass would create. The integrated LED removes the need for bulb replacement during the fitting's service life.
Specification
| Height |
19.5cm |
| Width |
31cm |
| Depth |
18cm |
| Material |
Plastic |
| Wattage |
LED 3000K 12W |
| Warranty |
2 Year |
Frequently Asked
Does it come with a bulb?
Yes. The Briller uses an integrated 12W LED at 3000K, so no separate bulb is required. The LED is built into the fitting behind the central diffuser.
Are the spheres glass or acrylic?
The decorative spheres are clear acrylic rather than cut crystal or glass. Acrylic gives a softer, more uniform light scatter and keeps the fitting lightweight, which is useful for wall mounting.
Is it dimmable?
Dimmer compatibility depends on the specific dimmer model used with integrated-LED fittings. Please contact us before pairing the Briller with a dimmer to confirm suitability.
Can it be used in a bathroom?
The Briller does not carry a bathroom IP rating in its specification, so it should be installed in dry indoor locations only — living rooms, bedrooms, hallways and similar spaces away from direct moisture.