Description
Just 50mm across the visible face, this is one of the smallest downlights we sell, and it is meant to be noticed as little as possible. The white outer rim surrounds a frosted face, which softens the integrated LED behind it and spreads light broadly rather than throwing a hard cone. At 7W it gives a warm 2700K tone, the sort of light that suits an evening room and sits comfortably beside older tungsten fittings elsewhere in the house.
We reach for it where a full-size downlight would look heavy: a run along a hallway ceiling, above a shower room mirror, or picking out a shelf recess in a kitchen. It is rated against splashing water, so bathrooms and cloakrooms are within its remit, and the wide spread means a handful of them will wash a small ceiling evenly. It is not dimmable, so plan for a plain switch, and where you want a lower level after dark we would put it on its own circuit alongside table lighting.
The driver is supplied with it, and the fitting is double insulated. Wipe the face now and then with a dry cloth once the power is off and the light has had time to cool; the LED is fixed in place, so there is nothing to replace behind it and no lamp to buy. It carries a three year warranty. The same downlight is stocked in cooler colour temperatures if you want a brighter, less golden light in a kitchen or utility, and running the warm version through living space with a crisper white over a work area is a pairing we are happy to recommend.
Specification
| Colour |
White |
| Second Colour |
Frosted |
| Ceiling Mountable |
Yes |
| Weight |
0.18KG |
| Diameter |
50mm |
| Height |
108mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
87lm/W (±5%) |
| Beam Angle |
315° |
| System Flux |
610lm (±5%) |
| Light Distribution |
S |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What cut out does it need?
The aperture is 35mm, with an overall face diameter of 50mm and a body height of 108mm.
Can it go in a bathroom?
Yes. It is IP44 rated, which covers splashing water, so it is suitable for bathrooms and shower rooms outside the direct spray zones.
How much light does it give?
Around 610 lumens at 7W, with a rated average life of 30,000 hours.
Is it dimmable?
No, this version is non-dimmable and should be wired to a standard switch.
Do I need to buy a bulb or a driver?
Neither. The LED is integrated and the driver is included in the box.
How wide is the light spread?
The frosted face gives a 315 degree beam, so the light is diffuse rather than a tight spot.