Description
The Bano is a 101.5cm diameter crystal chandelier built around five polished chrome circular frames that step down in diameter from top to bottom, creating a tiered cascade structure. Each frame supports multiple strands of precision-cut crystal beads that hang vertically, forming a dense cylindrical column of reflective elements. An integrated 150W LED system runs through the centre of the chandelier, delivering 17500 lumens at 4000K cool white across all five tiers.
Designed for entrance halls, double-height living spaces, and commercial lobbies with ceiling heights of 3.5m or above, the Bano offers an adjustable drop between 780mm and 3300mm, allowing the fitting to be positioned to suit room proportions. The polished chrome finish on the frame amplifies light reflection from the crystal strands, multiplying the visual brightness beyond the raw lumen output. The 120° beam angle from the central LED spreads light evenly across the five tiers, illuminating each layer of crystal from within.
At 22.8kg, the chandelier requires a ceiling mounting point rated for structural load, typically a solid joist or reinforced ceiling rose rather than a standard plasterboard fixing. The five-tier structure maintains its geometric alignment under load due to the rigidity of the chrome frames and the balanced distribution of crystal weight. The LED is dimmable when paired with a compatible trailing-edge or leading-edge dimmer, though dimmer compatibility should be confirmed before installation as not all dimmers handle the 150W load smoothly.
The 4000K colour temperature sits in the cool white range, producing a crisp, neutral light that brings out the clarity of the crystal without the warmer yellow cast of 3000K LEDs. This makes the Bano more suited to contemporary interiors with cooler palettes than to traditional or warm-toned spaces. The polished chrome finish pairs cleanly with stainless steel, glass, white marble, and grey stone surfaces common in modern high-ceiling architecture.
Specification
| Colour Finish 1 |
Polished Chrome |
| Diameter |
1015mm |
| Minimum Drop |
780mm |
| Maximum Drop |
3300mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Max Wattage |
150W |
| Lamp Included |
Yes - Integrated |
| Colour Temperature |
4000K Cool White |
| Beam Angle |
120° |
| Lumen |
17500lm |
| Power Consumption |
150W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Weight |
22.80KG |
| Warranty |
3 Years |
Frequently Asked
Is the Bano dimmable?
Yes. The integrated 150W LED is dimmable when paired with a compatible trailing-edge or leading-edge dimmer. Dimmer compatibility should be confirmed before installation, as not all dimmers handle the 150W LED load smoothly. Contact us if you need dimmer recommendations for this fitting.
What ceiling height is needed?
The chandelier is designed for ceiling heights of 3.5m or above. The adjustable drop ranges from 780mm to 3300mm, allowing the fitting to be positioned to suit the room. In a typical entrance hall with a 4m ceiling, the chandelier would hang with approximately 1-1.2m clearance below the lowest crystal strands.
What mounting strength is required?
At 22.8kg, the Bano requires a ceiling mounting point rated for structural load. This typically means fixing into a solid joist or using a reinforced ceiling rose, rather than relying on a standard plasterboard fixing. Professional installation is recommended to ensure safe load distribution.
Is 4000K too cool for a residential space?
The 4000K colour temperature produces a crisp, neutral cool white light that suits contemporary interiors with cooler palettes (greys, whites, stainless steel, glass). It is less suited to warm-toned traditional interiors where 3000K would be more appropriate. The cool white brings out the clarity of the crystal without the warmer yellow cast of lower colour temperatures.