Description
The Atria Left is a 600mm tall wall light built around a tapered brushed brass frame with a sculpted natural alabaster panel set into the lower half. The frame leans gently to the left, mirroring the right-handed version of the same design, and the alabaster is cut with an irregular peaked profile that suggests a mountain ridge against the open brass aperture above. An integrated 5W LED behind the stone casts warm 3000K light through the panel.
Designed for hallways, bedrooms, living rooms and stair landings, the Atria Left works as a single accent or as a pair with the right-leaning version flanking a doorway, mirror, fireplace or piece of artwork. The 60mm projection keeps the fitting close to the wall, which suits narrow corridors and circulation spaces where deeper sconces would intrude. The asymmetric form reads as sculpture during the day and as a soft glowing panel once switched on.
The frame is solid copper finished in brushed brass, paired with a hand-finished Spanish alabaster insert. Each alabaster panel shows different mineral veining and tonal variation depending on the section of stone it was cut from, so no two Atria wall lights illuminate identically. At 600mm tall by 230mm wide the fitting adds vertical line to a wall without dominating it, and the integrated LED removes the need to source a compatible lamp.
Specification
| Material |
Solid Copper & Natural Alabaster |
| Finish |
Brushed Brass & Soft White |
| Height |
600mm |
| Width |
230mm |
| Projection |
60mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Wattage |
5W |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Downloads
Instruction Manual
Frequently Asked
Is there a matching right-handed version?
Yes. The Atria Right Alabaster Wall Light is the mirrored counterpart to this fitting, with the frame leaning to the right and the alabaster profile reversed. The two are designed to be installed as a symmetrical pair flanking a doorway, mirror, fireplace or piece of artwork.
Does the alabaster vary between pieces?
Yes. Each panel is hand-finished from natural Spanish alabaster, so the veining, tonal variation and translucency differ between individual pieces. Once lit, the warm 3000K LED brings out the mineral pattern in the stone, and these variations become a feature of the fitting rather than a defect.
Is the LED replaceable?
The 5W LED is integrated into the fitting rather than housed in a removable lamp socket. Integrated LEDs typically last 25,000-50,000 hours, which equates to many years of normal residential use before replacement is needed.
How is the alabaster cleaned?
Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, polishes or chemical cleaners on either the alabaster or the brushed brass frame.