Description
This is a small round recessed light with an angled face, so the beam falls to one side rather than straight out at eye level. The face measures 80mm across and sits back into the wall rather than standing proud of it, which keeps the look quiet by day. Inside is an integrated 3W LED giving a warm white light, and the driver is supplied with it.
We reach for these where a bracket light would be too much: alongside steps, down the length of a path, either side of a front door, or picking out a low garden wall. The output is modest and deliberately so, enough to mark a route and show a change of level without glare. Sealed against rain and washing down with a hose, it is rated for outdoor positions, and nothing projects into a walkway. It is not dimmable, so it works from an ordinary switch, and a run of several spaced evenly does more for a garden than one brighter fitting on its own.
The finish is a matt sand black, a fine textured black that hides water marks and looks settled against brick, render and timber. To clean, switch off at the wall, then wipe the lens with a damp cloth and dry it; grit and cobwebs gather at the recess over winter more than anything else. It carries a three year warranty. We stock the same round angled head in sand white and anthracite, and the range also runs to square angled versions and to round and square eyelid types if you prefer a hooded front. The LED is built in, so there is no lamp to buy.
Specification
| Colour |
Sand Black |
| Wall Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.20KG |
| Diameter |
80mm |
| Height |
85mm |
| Cut Out |
72mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
50000hrs |
| LED Brand |
KEGU |
| SMD Chipset |
3535 |
| LED Power |
3W (±5%) |
| Type of LED |
3535 |
| Lumens per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle |
47° |
| System Flux |
210lm (±5%) |
| CRI |
>80 |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
700mA |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
It produces 210 lumens from a 3W integrated LED, at 3000K warm white, in a fairly tight 47 degree beam. That is marker-level light for steps, thresholds and paths rather than general illumination.
Can I put it on a dimmer?
No. It is a non-dimmable fitting and should be run from a standard on/off switch or a timer.
Is it suitable for an exposed wall?
Yes. It is rated IP65, so it withstands rain from any direction and low pressure water jets, which also means it can be washed down with a hose.
Do I need to buy a driver or a transformer?
No, the driver is supplied with the light.
What are the sizes?
The visible face is 80mm in diameter with a body height of 85mm, and the opening it seats into is 72mm.
How long should the LED last?
Average rated life is 30,000 hours, with a colour rendering index above 80.