Description
A small round recessed light with an angled face, finished in anthracite so it sits quietly in a wall by day and does its work after dark. The LED is built in and gives a warm white light, and the angled front throws the beam to one side so it washes the surface below rather than shining back at you. The visible face measures 80mm across. At 3W it is a low draw, and it is not dimmable, so it runs from a simple on and off switch.
We use these where a projecting fitting would be in the way: along a passage at the side of a house, down a run of garden steps, either side of a porch, or set into a low boundary wall to mark a path. Output is 210 lumens, which is the right order for guiding people safely rather than flooding a terrace, so a short line of them reads better than a single one on its own. They suit modern brick and render, and anyone who wants the light without the fitting on show.
The body is sealed against rain and driven dust, and the driver comes with it. Anthracite is a forgiving finish outdoors, hiding the film that builds up over a wet winter, though we would wipe the lens with a damp cloth each spring so nothing dulls the output, with the power off first. It carries a three year warranty. The same round angled head is stocked in sand black and sand white, and there is a square version and a rounded eyelid form in anthracite as well, so a whole garden can be kept consistent.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.20KG |
| Diameter |
80mm |
| Height |
85mm |
| Cut Out |
72mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
50000hrs |
| LED Brand |
KEGU |
| SMD Chipset |
3535 |
| LED Power |
3W (±5%) |
| Type of LED |
3535 |
| Lumens per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle |
47° |
| System Flux |
210lm (±5%) |
| CRI |
>80 |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What are the full dimensions?
The face is 80mm in diameter and the body is 85mm deep, with a 72mm cut-out diameter. It weighs 0.2kg.
What colour is the light?
Warm white at 3000K, which keeps brickwork, render and timber looking natural rather than cold.
Can I dim it?
No. It is a non-dimmable fitting and should be run from a standard switch or a timer rather than a dimmer.
Is the LED replaceable?
The LED is integrated and rated at 30,000 hours, with the driver supplied. There is no separate lamp to buy or change.
How well protected is it against the weather?
It is rated IP65, so it copes with rain and wind-blown dust in an exposed position.
How narrow is the beam?
Around 47 degrees, angled to one side, which gives a defined wash down a wall or across a step rather than a wide spread.