Description
It throws light both upward across the wall and downward to the ground, from a compact rectangular body finished in sand white. Opal white lenses top and bottom soften the output, so what you notice is the light on the wall rather than the source itself. The integrated LED draws 6W and runs at 3000K, a warm tone that flatters brick, render and painted timber once the daylight has gone. It is not dimmable, and there is no switch on the body, so it answers to whatever controls the circuit.
It suits a front or back door, a porch, a garden wall or the side of a garage, and it looks best in pairs where there is symmetry to work with. The upward and downward beams give a grazed line of light on the wall and a pool at your feet, enough to show a step or a keyhole without glare in the eyes. We reach for it where a lantern would sit too heavily, and in narrow passages, since a projection of 80mm holds it tight to the wall. It is sealed against dust and splashing water, so rain and a hose do it no harm.
The housing keeps a fine sand white finish that holds its texture in low light, paired with the opal white lenses at each end. To keep the output where it should be, clear cobwebs and grit from the lenses each season; a damp cloth followed by a dry one is plenty, with the power off first. Salt air and garden dust dull the light long before anything else does. It carries a three year warranty. We also stock the same fitting in anthracite, which is the one to choose if you would rather it sank into a dark wall or a slate cill.
faq
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.58KG |
| Length |
220mm |
| Width |
90mm |
| Projection |
80mm |
| Materials Used |
Aluminium Die-Casting Body, Glass Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
375lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What light output does it give?
Around 375 lumens from a 6W integrated LED, split between the upward and downward apertures.
Can it be dimmed?
No. It is a non-dimmable fitting, so it is best paired with a standard on/off switch or an outdoor lighting circuit.
How big is it?
It measures 220mm long by 90mm wide, projecting 80mm from the wall.
Is the LED replaceable?
No, the LED is integrated within the body, so there is no lamp to change.
Is it suitable for a coastal or exposed site?
It is rated IP54 against dust and splashing water, which covers normal rain exposure. On a coastal site, rinse and dry the housing regularly to keep salt off the finish.
What colour is the light?
3000K warm white, a soft yellow-toned light rather than a crisp cool one.