Description
Light leaves this one in two directions, washing up and down the face of the wall it sits on so you get a low pool near the ground and a matching glow above. The body is finished in anthracite, a dark grey that reads almost black against brick and render, while the opal white diffusers keep the warm white output soft rather than glaring. The LED is built in and draws 6W, and it is not dimmable, so it runs from an ordinary switch with no extra gear behind it.
Two of these either side of a front door give a tidy, balanced wash of light without anything hanging into head height, and a single one does good work over a back step, beside a garage door or along a path where a lantern would look fussy. It is rated for outdoor positions exposed to rain and windblown dust, so a porch, a side return or an open garden wall all suit it. We would choose it for a modern house front where the aim is quiet light on the brickwork rather than a bright lantern to look at.
The casing is a slim rectangular block, 220mm on its long axis and standing 80mm off the wall, with the diffuser sunk into each end. Anthracite hides road grime and rain marks well, though a wipe over the diffusers with a damp cloth two or three times a year keeps the output clean, and a soft brush clears cobwebs from the recesses. Switch off at the isolator and let it cool before you touch it. It carries a three year warranty. We also stock the same fitting in a sand white finish if you are working against a pale render or a light stone wall, and the pair mix happily around a corner. The LED is integral, so there is nothing to fit.
Specification
| Colour |
Anthracite |
| Ceiling Mountable |
Yes |
| Weight |
0.58KG |
| Length |
220mm |
| Width |
90mm |
| Projection |
80mm |
| Materials Used |
Aluminium Die-Casting Body, Glass Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
375lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
It produces 375 lumens at 3000K, a warm white, split between the upward and downward openings. That is a gentle, ambient level suited to doorways and paths rather than floodlighting a driveway.
Can I put it on a dimmer?
No. The integrated LED is non-dimmable and should be wired to a standard on/off switch.
Is it suitable for a fully exposed wall?
Yes. It is IP54 rated, which covers splashing rain and dust, so an unsheltered house wall or garden wall is fine. We would not submerge it or site it where water pools against the body.
What are the dimensions?
It measures 220mm long by 90mm wide, with an 80mm projection from the wall, and weighs 0.58kg.
Does the LED need replacing?
The LED is integral and not a user-replaceable lamp, so there is no bulb to buy. The fitting carries a three year warranty.
What colour is the shade?
The diffusers are opal white, which is what softens the light at each end, set into the anthracite body.