Description
Angora is a floor lamp in light grey. A slim light-grey stem rising from a flat round grey disc base and curving over at the top into a small grey cone that hangs at an angle, open at its lower edge. The cone is short and straight-sided with a white lining, so the mouth reads bright against the chalky grey outside. A small brass collar sits at the top of the stem where the head joins, and a plain sliding joint breaks the stem partway up to set the height. The grey is matt and even on the base, the stem and the shade alike. The head sits well forward of the base.
It stands beside a chair or at the end of a sofa, where it puts one pool of light exactly where it is needed without lighting the whole space. That is what a floor lamp is for: it takes the reading light off the ceiling and puts it at shoulder height, so the room can be lit softly and still be worked in. The height is set on a collar on the stem and needs no tools, so it is adjusted where it stands rather than at installation. There is an inline foot switch on the flex, so it is reached at the fitting rather than by following the flex down.
The holder is E27 and takes up to 40W. It plugs into an ordinary socket, so it needs no electrician. It is class II, double insulated, so it needs no earth, and it is rated IP20 for dry indoor rooms.
Specification
| Finish |
Light Grey |
| Maximum Wattage |
40W |
| Light Source |
E27 lamp, not included |
| Switch |
Inline foot switch on the flex |
| Height Adjustment |
Collar on the stem, no tools |
| Supply |
230V 50Hz |
| Insulation Class |
Class II |
| IP Rating |
IP20 |
| Suitable Location |
Indoor, dry rooms |
Downloads
Instruction manual (PDF)
Frequently Asked
Which bulb does it take?
An E27 lamp up to 40W. Bulbs are supplied separately so you can choose the brightness and colour you want.
Can it be dimmed?
Yes, on a compatible dimmer, provided the lamp you fit is a dimmable one. The fitting has no dimmer of its own.
Does it need an electrician?
No. It comes on a flex with a moulded plug and goes into an ordinary socket.
Where is the switch?
There is inline foot switch on the flex.
How does the height adjust?
The height adjusts on collar on the stem, no tools.
Does it need an earth?
No. It is class II, double insulated, so it is wired live and neutral only.