Description
A short stainless steel cylinder that throws light both up and down, with a frosted polycarbonate diffuser closing each end. The output is cool white at 4000K, around 600 lumens all told, so the beams read crisp rather than warm and the wall above and below picks up a soft column of light. At 76mm across it is a slim thing to have on a wall, more a quiet vertical accent than a feature.
We would fit this either side of a front door, or along a sheltered patio wall, where the up and down wash gives shape to brickwork without glare at eye level. It is equally at home indoors, in a hallway or climbing a stair wall, and it is sealed well enough for a bathroom or a utility room. There is no switch on the body, so it works from the wall switch, and it is not dimmable: full output every time. It suits anyone after even, repeatable light rather than something to adjust.
The body is stainless steel and the diffusers are frosted polycarbonate, with the LEDs built in rather than lamped, so there is nothing to change over the life of the fitting. Keep it looking right by wiping the steel with a damp cloth and drying it off straight away; outdoors, a glance behind the diffusers for cobwebs now and then is worth the minute. It carries a two year warranty. If you want light thrown in a single direction only, we also stock an upward version in the same range, and the pair sit happily together along the same elevation.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.50KG |
| Width |
76mm |
| Height |
167mm |
| Projection |
122mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
2 x 4W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
600lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
8W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
The integral LEDs produce around 600 lumens in total, split between the upward and downward apertures, at a cool white 4000K.
Can it be dimmed?
No. It is a non-dimmable fitting, so it should be run from a standard switch rather than a dimmer or trailing edge module.
Is it suitable outside?
Yes, it is rated IP44, which covers sheltered outdoor positions such as porches, patio walls and covered entrances, as well as indoor rooms including bathrooms and utility spaces.
How far does it stand off the wall?
The projection is 122mm, with a height of 167mm and a diameter of 76mm, so it stays tight to the wall in a corridor or beside a doorway.
Do I ever need to replace the LED?
No. The LED module is integrated and rated at 20,000 hours average life, so there is no lamp to buy or swap.
Does it come with its own switch?
It does not. The fitting is unswitched and is controlled from the wall switch or circuit it is wired to.