Description
A compact stainless steel cylinder that throws its light upward against the wall, with a frosted polycarbonate diffuser closing the top so the beam spreads softly instead of glaring. The LED is built into the body and draws 10W, giving around 500 lumens of cool white at 4000K, a clean, crisp light that keeps steel, render and stone looking sharp. It is not switched at the fitting and not dimmable, so it works straight from a wall switch or a lighting circuit. We keep it as the upward-only member of the range.
Rated IP44, it copes with splashes and wind-driven rain in a sheltered position, which makes it as much an outdoor fitting as an indoor one. Porches, side passages, garage walls and the stretch beside a back door all suit it, and inside it earns its keep in a hallway, a stairwell or a utility room where a column of light up the wall is more useful than a shade at head height. We would use a pair flanking a front door for symmetry, or a run of them spaced along a long boundary wall to give the eye something to follow after dark.
The body is stainless steel, which stands up to open and coastal sites better than a painted finish, and the diffuser is polycarbonate rather than glass, so it shrugs off knocks. Because the LED is integral there is nothing to unscrew and nothing extra to order. For cleaning, isolate the supply, let the tube cool, then wipe it with a damp cloth and dry it straight away so water marks do not sit on the steel; skip abrasive creams and wire wool. It carries a two year warranty. If you want light going down as well as up, the range also runs to an up and down version in the same cylinder and finish.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.50KG |
| Width |
75mm |
| Height |
223mm |
| Projection |
122mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 10W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
500lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
10W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How large is it on the wall?
The cylinder is 75mm across and 223mm tall, and it stands 122mm out from the wall.
Does it come with a lamp?
Yes. The LED is integrated, rated at 10W with an average life of 20,000 hours, so there is no separate lamp to buy or change.
What colour is the light?
4000K cool white, at roughly 500 lumens. It reads as a crisp, neutral light rather than a warm yellow one.
Can it be dimmed?
No. It is non-dimmable and has no switch of its own, so it should be controlled from a wall switch or a lighting circuit.
Is it suitable outdoors?
Yes, in a sheltered spot. The IP44 rating covers splashing water, so porches, passages and house walls under some cover are all within its remit.
What is the diffuser made from?
Frosted polycarbonate, which softens the upward beam and is more forgiving of impacts than glass.