Description
A shallow square plate in stainless steel, with a square grid cover over a frosted polycarbonate diffuser so the LED behind it is never seen directly. The face measures a little over 18cm across, and it sits close against the wall, projecting only a few centimetres. The LED is built in and runs at 14W, giving a crisp cool white at 4000K.
We reach for this one at front doors, porches and side passages, where a light needs to be splash resistant and out of the way of shoulders and shopping bags. It is rated against rain and spray, so it holds up under an open porch or on an exposed wall, and it is equally at home indoors along a hallway or up a stair. It can go on a ceiling as well as a wall, which helps in a low soffit or a utility space. There is no switch on the body and no dimming, so it works from the room switch.
The housing is stainless steel, which copes with damp air far better than a painted finish, and the cover and diffuser are polycarbonate. Wipe the frame down with a damp cloth and a little mild detergent, then dry it off so no water sits in the corners; the diffuser takes the same treatment, while abrasive creams and wire wool will scar both. The LED is fixed in place, so there is nothing to change and nothing to buy alongside it. It carries a two year warranty. If the grid is not the pattern you want, we also stock the same light with a rectangular slot cover.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.50KG |
| Width |
178mm |
| Height |
216mm |
| Projection |
59mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 14W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
1050lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
14W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it?
The integrated LED draws 14W and produces around 1050 lumens, which is enough to light a doorway, a porch ceiling or a short stretch of path without dazzling anyone standing under it.
Can it be dimmed?
No. It is a non-dimmable fitting and should be run from a standard on/off switch rather than a dimmer or trailing edge module.
Is the light warm or cool in tone?
It is a cool white at 4000K, a clean neutral tone that suits stainless steel, grey render and modern brickwork better than a yellower light would.
What are the dimensions?
The face is 178mm wide by 216mm high, and it stands just 59mm off the surface it is fixed to. The fitting weighs 0.5kg.
Can the LED be replaced later?
No, the LED is integral to the fitting. It is rated for around 20,000 hours of use, so in a porch or hallway that is many years of evenings.
Will it suit a bathroom?
Yes, its splash protection makes it suitable for bathroom use away from direct water, and the same rating is what lets it be used outdoors.