Description
Light leaves this one through a single rectangular slot cut across a stainless steel faceplate, with a frosted polycarbonate diffuser behind to soften the beam. The LED is built in, drawing 14W and running at a cool white 4000K that reads clean against brushed metal. There is no switch on the body and no dimming, so it works from a wall switch. The plate is around 18cm wide and sits tight to the wall, with very little projection.
Sealed against splashing as well as dry indoor air, it suits a covered porch, a back door, a passage between house and garage, or a cloakroom where a shaded fitting would look fussy. We use lights like this along a stairwell or a long hallway, spaced in a run, where the light wants to be low and even rather than pooled. The output is a broad wash rather than a reading light, so add a table lamp where you need detail. Anyone wanting quiet, low-profile lighting outside that carries on indoors will get on with it.
The housing is stainless steel, a sensible choice by a damp doorway, and the diffuser is polycarbonate rather than glass, so it takes a knock without shattering. Wipe the metal along the grain with a damp cloth and dry it off; the frosted panel comes up with warm water and no solvents, once the power is off and the fitting cool. It carries a two year warranty. The LED is integral, so there is nothing to buy alongside it. We stock the same fitting with a square grid cover, if you prefer a pattern of small openings to one clean slot.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.50KG |
| Width |
178mm |
| Height |
216mm |
| Projection |
59mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 14W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
1050lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
14W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
System flux is 1050 lumens at 4000K cool white, which is enough to mark a doorway clearly or light a short run of hallway without glare.
Can it be used outside?
Yes, it is IP44 rated, so it is fine in a sheltered exterior position such as a porch, a covered walkway or a recessed back door, as well as indoors.
What are the dimensions?
It measures 178mm wide by 216mm high, with a projection of just 59mm from the wall. Weight is 0.5kg.
Will it work with a dimmer?
No. The integrated LED is non-dimmable and the fitting is unswitched, so it should run from a standard on/off wall switch.
How long should the LED last?
Average rated life is 20,000 hours. As the LED is integral there is no lamp to replace during that time.
How should the frosted panel be cleaned?
Warm water on a soft cloth, with the power off and the fitting cool. Avoid solvents and abrasive creams, as they will haze the polycarbonate.