Description
A small square face in stainless steel, with a louvred front that lets the light out in soft horizontal bands rather than throwing it straight ahead at eye level. Behind the louvres sits an opal white diffuser, so the glow is spread and gentle. The face measures 12cm each way and the body is shallow, keeping the whole thing tight against the wall. The LED is built in, drawing 2.4W and giving a clean 4000K cool white that reads crisp against pale render, brick and painted timber alike.
Because it is sealed against splashing rain, it earns its place in sheltered outdoor spots: a porch, a side passage, the wall beside a back door, a run along steps or a low garden wall. Indoors it does quiet work in a utility room, a boot room or a cloakroom where you want light at low level without glare. We often suggest a pair, one either side of a doorway, or three or four spaced evenly along a path wall for a run of downward washes. There is no dimming to set up; a standard switch is all it asks for.
The stainless steel body handles damp air well, and the opal panel keeps the diode itself out of direct view. To keep the finish looking fresh, wipe the face with a cloth wrung out in warm water when grit or salt film builds up, then dry it off so no marks are left behind; nothing abrasive, as it will dull the steel. It carries a two year warranty. The same fitting is offered in a round version if you prefer softer outlines, and in a plain-fronted version without the louvres for a smoother, more even spread. Mixing the square and round shapes along one elevation works better than you might expect, and the light output is identical between them.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.20KG |
| Width |
120mm |
| Height |
120mm |
| Projection |
47mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 2.4W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
130lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
2.4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it stand off the wall?
The body projects 47mm, so it sits close and stays clear of doors, gates and passing shoulders.
Can the built-in LED be replaced?
No. The LED is integral to the fitting, rated at around 20,000 hours of use, and the whole unit is replaced at the end of its life.
How bright is it?
It produces 130 lumens at 4000K, which is a marker light and accent level rather than a main light for a room. Use several along a wall if you want a continuous wash.
Will it work on a dimmer?
No, it is not dimmable and should be run from an ordinary on/off switch.
Is it suitable for a bathroom?
It is rated IP44 against splashing water, which suits a cloakroom or a utility area. For zoned positions in a bathroom, check the zone requirements for the exact spot first.
What colour is the diffuser?
Opal white, set behind the stainless steel louvres.