Description
A small square panel in stainless steel, with a plain opal white face set into it and no fuss anywhere else. Each side measures 12cm, and it sits close to the wall, so it reads as a quiet square of light rather than a fitting. The LED is built in and gives a cool white 4000K light, which keeps the steel looking crisp and the spread even. There is no dimming, so it comes up at full output on the switch.
We reach for this one where a doorway needs marking rather than flooding: beside a back door, along a covered walkway, either side of a porch, or up a run of outside steps where a low glow at head height is all that is wanted. It is rated for exterior use and copes with splashing and damp air, which also makes it worth considering in a shower room or a utility. At 2.4W it asks very little of the circuit, so a pair or a short row can stay lit all evening without a second thought.
The body is stainless steel, picked for outdoor air, and the diffuser is opal white so the light softens instead of showing a bright spot. Keeping it right is simple: switch off, wipe the steel and the opal face with a damp cloth, dry it before the power goes back on, and clear any cobwebs from behind it while you are there. It carries a two year warranty. We stock the same fitting with a louvre face, which slots the light out through horizontal fins, and in a round version if you would rather avoid corners. The LED is integrated, so there is nothing to change and nothing to buy alongside it.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.20KG |
| Width |
120mm |
| Height |
120mm |
| Projection |
47mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 2.4W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
130lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
2.4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it?
It gives 130 lumens, which is a marker light rather than a working light. Use it to pick out a door, a step or a path edge, and pair it with something brighter overhead if you need to see by it.
Can it be used outdoors?
Yes. It is IP44 rated, so it will take splashing water and damp air. A spot with some shelter, such as under a canopy or a porch roof, will keep the steel looking its best for longer.
What are the full dimensions?
It is 120mm square with a projection of 47mm, so it stands well clear of shoulders and doorways.
Is it dimmable?
No. It runs at a fixed output, so it should be wired to a standard on/off switch rather than a dimmer.
What does the light look like in colour?
4000K cool white, which is a clean, slightly blue-leaning white. It suits stainless steel, grey render and painted brickwork better than a warm yellow would.
Will the LED need replacing?
The LED is integrated and rated at 20,000 hours, so in normal outdoor use you should not expect to be dealing with it for many years.