Description
A small round plate in stainless steel with an opal white diffuser, this one gives a soft, even wash of cool white light at 4000K. It measures 14cm across and sits shallow against the wall, so it reads as a neat disc rather than a bulky fitting. The LED is built in and draws only 2.4W, and it switches on and off rather than dimming.
We reach for it where light needs to be practical and unobtrusive: a porch, a back door, a side passage, the steps down to a garden room. It is rated for exterior use and copes with rain and splashing, which also makes it worth considering for a shower room or utility where damp is a fact of life. Because the diffuser spreads light rather than throwing a narrow beam, it works in a run along a wall as readily as on its own, and the cool white tone keeps paths and thresholds looking clear rather than yellow. It suits anyone who wants useful light outside the door that stays quiet by day.
The body is steel in a stainless finish, with the opal shade sitting over the light source, and the fitting is double insulated. Keeping it right is simple: a damp cloth over the diffuser now and then, since grit and cobwebs dull the output faster than anything else outdoors, and a wipe to lift salt off the metal if you are near the coast. It carries a two year warranty. If a round face is not what you are after, the range runs to a square version in the same finish, and both shapes are offered with a louvre front as well as this plain one. The LED is integral, so there is nothing to buy alongside it.
Specification
| Colour |
Stainless Steel |
| Ceiling Mountable |
Yes |
| Weight |
0.30KG |
| Diameter |
140mm |
| Height |
52mm |
| Projection |
52mm |
| Materials Used |
Stainless Steel, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 2.4W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| System Flux |
130lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
2.4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP44 |
| Average Life |
20000hrs |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Shade Material |
Polycarbonate |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How wide is it and how far does it stand off the wall?
The plate is 140mm in diameter and projects 52mm, so it stays close and tidy in a narrow porch or passage.
How much light does it give?
It produces around 130 lumens at 4000K cool white, which is enough to mark a doorway, a step or a short path rather than to light a whole garden.
Can it be dimmed?
No. It is a non-dimmable fitting, so it should be run from a standard on/off switch rather than a dimmer.
Will it cope with rain?
Yes. It is rated for exterior use against splashing water from any direction, so it is happy on an open wall as well as under a canopy.
What happens when the LED reaches the end of its life?
The LED is integral and rated at about 20,000 hours, so the fitting is replaced as a unit rather than relamped.
What is it made from?
Pressed steel with a stainless finish and an opal white diffuser.