Description
The AKVEN LED is a flush, recessed in-ground light that sets into the surface and is walked or driven over, throwing its beam upward to graze a wall, tree or façade. It takes a 12V MR16 lamp on a Gx5.3 base and runs at a maximum of 35W, giving around 300 lumens of warm 3000K light across a wide 120° spread. For buyers in the US this is the well light or in-grade format, sitting level with the ground rather than standing proud of it. The round body measures Ø72 mm and the light source faces up to deliver an uplighting wash from a low, unobtrusive fixture.
Set into paths, patios, decking, borders and driveways, the AKVEN suits any spot where a raised fitting would be in the way or at risk of being knocked. The upward 120° beam picks out planting, brickwork, columns and garden features, so it works as accent and façade grazing rather than as general area lighting. Because it is an uplighter and not an ambient ceiling fitting, its output is best judged by the throw and the surface it washes rather than by a floor coverage figure. Space several along a walkway or around a planted bed to build a layered scheme, keeping each unit clear of heavy standing water pooling points where possible.
Built from aluminium alloy with a green finish, the AKVEN carries an IP68 rating, so it is sealed against exposed outdoor and wet locations including burial and submersion. It runs on 12V AC or DC and so needs a transformer or driver rated to the load, which lets several fittings share one supply. The MR16 lamp is replaceable, the unit is not dimmable, and the rated lifespan is 25,000 hours. The fitting weighs 370 g and seats flush for a walk-over and drive-over installation. This light sits within the wider AKVEN range of outdoor and ground luminaires.
Specification
| Power |
max 35W |
| Voltage |
12 AC; 12 DC |
| Luminous flux |
300 lm |
| Colour temperature |
3000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP68 |
| Dimmable |
No |
| Mounting |
Surface Mounted |
| Lifespan |
25,000 hours |
| Cap / base |
Gx5.3 |
| Light source |
MR16 |
| Shape |
Other |
| Dimensions |
Ø72 mm |
| Weight |
370 g |
| Material |
Aluminium Alloy |
| Finish |
Green |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can the AKVEN be walked or driven over?
Yes, it is designed to sit flush with the ground and take foot and vehicle traffic, making it suitable for paths, decking and driveways. Set it level with the finished surface so nothing protrudes. Bed it on a firm, well-drained base to support the load over time.
Is it suitable for outdoor and wet locations?
Yes. The AKVEN is rated IP68, which means it is fully sealed against dust and can handle exposed outdoor sites, standing water and burial. This makes it appropriate for in-ground installation where drainage and weather are a factor.
Does it need a transformer or driver?
Yes. The fitting runs on 12V AC or DC rather than mains, so it requires a transformer or driver sized to the total load. One supply can feed several fittings, provided its rating covers their combined wattage. The MR16 lamp uses a standard Gx5.3 base.
How do I clean it?
Wipe the lens with a soft, damp cloth to clear soil, grit and surface debris that can dull the upward beam. Avoid abrasive pads that could scratch the cover. Clearing leaves and dirt from around the recess also helps drainage and keeps the output bright.