Free Delivery on all orders over £99*

Addressable LED Strip 11W/m Cool White Cuttable - IP65

£8999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This addressable LED strip puts each section of cool white light under individual control, so a single run can be sequenced, chased or animated through a compatible controller while staying a clean 4000K throughout. In US terms this is a digital led strip light or pixel tape, here built for white-only effects rather than colour change. It draws 11W per metre and gives 1100 lumens per metre, supplied on a 5 metre flexible reel that cuts to length every 10 cm at the marked points. The strip runs on a 24V DC supply, so it needs a matching 24V LED driver rather than a direct mains connection.

Because the light is delivered in addressable segments, this strip suits dynamic accent and feature runs where movement matters more than flat ambient fill: cove and ceiling perimeters, stair edges, signage outlines, display joinery and façade detailing. Coverage is best judged by the effect rather than a room area, since each segment can be lit, dimmed or sequenced independently along the run. With an IP65 rating it carries outdoors as readily as indoors, so the same tape works under a soffit, along a pergola or around an exposed canopy. Plan the layout in 10 cm steps and keep the driver sized to the total metreage powered from each feed.

The strip is rated IP65 for weatherproof use in exposed and wet locations, with a coated profile that resists splashes and damp. Colour rendering is strong at Ra 90, so finishes and surfaces it grazes stay true under the cool white tone. Rated life is 30,000 hours and the reel weighs 128 g across its 5 metre length. Cut only at the marked 10 cm intervals, then connect each length to a 24V DC driver and addressable controller. We also stock the matching drivers and controllers needed to complete an addressable run.

Specification
Power 11 W/m
Luminous flux 1100 lm/m
Efficiency 100 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 10 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, so it is not a mains-direct fitting and needs a matching 24V LED driver. Size the driver to the total wattage of the run you power from each feed, allowing 11W for every metre connected.

Where can I cut the strip?

The strip cuts to length at the marked points every 10 cm. Only cut on these intervals to keep each addressable segment working correctly, then make the connection at the cut end.

Can it be used outdoors?

Yes. It is rated IP65, which makes it weatherproof and suitable for exposed outdoor and wet locations such as soffits, pergolas and canopy edges, as well as indoor coves and joinery.

Is this a colour-changing strip?

No. This is a single-tone cool white strip at 4000K, with per-pixel control of white light only for chasing and sequenced effects. It does not change colour, and a compatible addressable controller is needed to drive those effects.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This addressable LED strip puts each section of cool white light under individual control, so a single run can be sequenced, chased or animated through a compatible controller while staying a clean 4000K throughout. In US terms this is a digital led strip light or pixel tape, here built for white-only effects rather than colour change. It draws 11W per metre and gives 1100 lumens per metre, supplied on a 5 metre flexible reel that cuts to length every 10 cm at the marked points. The strip runs on a 24V DC supply, so it needs a matching 24V LED driver rather than a direct mains connection.

    Because the light is delivered in addressable segments, this strip suits dynamic accent and feature runs where movement matters more than flat ambient fill: cove and ceiling perimeters, stair edges, signage outlines, display joinery and façade detailing. Coverage is best judged by the effect rather than a room area, since each segment can be lit, dimmed or sequenced independently along the run. With an IP65 rating it carries outdoors as readily as indoors, so the same tape works under a soffit, along a pergola or around an exposed canopy. Plan the layout in 10 cm steps and keep the driver sized to the total metreage powered from each feed.

    The strip is rated IP65 for weatherproof use in exposed and wet locations, with a coated profile that resists splashes and damp. Colour rendering is strong at Ra 90, so finishes and surfaces it grazes stay true under the cool white tone. Rated life is 30,000 hours and the reel weighs 128 g across its 5 metre length. Cut only at the marked 10 cm intervals, then connect each length to a 24V DC driver and addressable controller. We also stock the matching drivers and controllers needed to complete an addressable run.

    Specification
    Power 11 W/m
    Luminous flux 1100 lm/m
    Efficiency 100 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 10 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, so it is not a mains-direct fitting and needs a matching 24V LED driver. Size the driver to the total wattage of the run you power from each feed, allowing 11W for every metre connected.

    Where can I cut the strip?

    The strip cuts to length at the marked points every 10 cm. Only cut on these intervals to keep each addressable segment working correctly, then make the connection at the cut end.

    Can it be used outdoors?

    Yes. It is rated IP65, which makes it weatherproof and suitable for exposed outdoor and wet locations such as soffits, pergolas and canopy edges, as well as indoor coves and joinery.

    Is this a colour-changing strip?

    No. This is a single-tone cool white strip at 4000K, with per-pixel control of white light only for chasing and sequenced effects. It does not change colour, and a compatible addressable controller is needed to drive those effects.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.