Description
Two G9 lampholders sit along a slim satin nickel bar, aimed forward and down so the light lands where you point it rather than washing across the room. At 35cm wide it covers a modest framed print, a mirror or a short run of shelf without spilling much past the edges. A toggle switch on the fitting itself means it can be worked on its own, which is handy where the nearest wall switch is over by the door.
This is the sort of light we use for close, directed jobs: over a picture in a hallway, above a mirror on a landing, or along open shelving where a pendant would sit in the way of your head. We would fit warm white LED capsules here, and dimmable ones on a compatible dimmer if you want the level to drop in the evening. Keep it to dry rooms indoors, so a study, a sitting room chimney breast or a bedroom rather than anywhere steamy or outside.
The satin nickel has a low sheen instead of a mirror shine, which keeps hard reflections off glazed pictures and shows fingerprints far less than polished metal. Upkeep is simple enough: turn it off at the switch, give the lamps a moment to cool, then run a dry duster along the bar and around the lampholders, using a barely damp cloth only on the metalwork if something has marked it. It carries a one year warranty. We stock the same design in satin black and antique brass, and in a longer 60cm size with more lamps for wider frames and larger canvases, so a pair either side of a chimney breast can be matched to a bigger one above it. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.47KG |
| Width |
350mm |
| Height |
125mm |
| Projection |
220mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
2 x G9 33W max (lamps not included) |
| Lamp Cap |
G9 |
| Recommended Lamp |
LED (Capsule G9) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Two G9 capsules, up to 33W each. We would choose LED capsules, which keep the running cost and the heat down in a fitting this close to a picture.
Can it be dimmed?
Yes, provided you fit dimmable G9 capsules and pair them with a suitable dimmer. The toggle switch on the fitting is on and off only.
How far does it stand off the wall?
The projection is 220mm, with a height of 125mm, so it reaches out enough to throw light down the face of a frame.
Is it suitable for a bathroom?
No. It is rated IP20, so it belongs in dry rooms. Choose a bathroom-rated fitting for anywhere near a bath or shower.
How do I clean the finish?
With the power off and the lamps cool, dust with a soft dry cloth. If marks remain, use a cloth wrung out in plain water and dry it straight away. No sprays or abrasive creams.
What other sizes and finishes are there?
This 35cm two light version comes in satin nickel, satin black and antique brass, and there is a 60cm four light version in the same three finishes.