Description
The Knightsbridge 9W LED Linkable Striplight is a 538mm white polycarbonate under-cabinet light with adjustable colour temperature switching between 3000K warm white, 4000K neutral white and 6500K cool white. A push-button control on the fitting cycles through the three colour modes, and the built-in memory chip retains the last setting when the power is switched off and on again, so the light returns to the same temperature on each use.
Designed for kitchen under-cabinet lighting, display shelving, workshop task lighting and utility rooms, the striplight mounts via the supplied fixing clips or adhesive pads. The 2m mains lead connects to a standard UK 230V socket or can be hard-wired into a fused spur. Up to 20 units can be linked together using the supplied coupler or optional linking leads, with each unit independently switchable via its own push-button despite being wired in series. This allows sections of a linked run to be turned on or off without affecting the rest of the circuit.
The opal polycarbonate diffuser spreads the LED output evenly along the 538mm length, producing 685-690 lumens depending on the colour temperature selected (675 lumens at 6500K, 685 lumens at 3000K, 690 lumens at 4000K). The Class II double-insulated construction requires no earth connection, simplifying installation in older properties or metal-framed cabinetry. The striplight sits 36mm from the wall when mounted and has a 22.8mm width, fitting into shallow cabinet plinths and recesses where taller battens would not fit. The IP20 rating is suitable for dry indoor locations.
Specification
| Length |
538 mm |
| Width |
22.8 mm |
| Projection |
36 mm |
| Construction |
Polycarbonate |
| Finish |
White |
| Class |
II |
| IP Rating |
IP20 |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Opal |
| Lamp Technology |
LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
54000 |
| Energy Rating (Class) post 2021 SLR |
F |
| Beam Angle |
140 |
| CCT |
3000/4000/6500 K |
| Light Colour |
CCT |
| Lumens |
685 / 690 / 675 lm |
| Lumens (Light Source only) |
935 lm |
| Wattage |
9 |
| Efficacy |
107.7 lm/W |
| CRI |
>80 |
| Warranty |
2 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
How do you change the colour temperature?
A push-button switch on the striplight body cycles through the three colour modes: 3000K warm white, 4000K neutral white and 6500K cool white. The built-in memory chip saves the last setting, so the light returns to the same temperature when switched on again.
How many units can be linked together?
Up to 20 striplights can be linked using the supplied coupler or optional linking leads. Each unit remains independently switchable via its own push-button, allowing sections of a linked run to be turned on or off without affecting the rest of the circuit.
Is it dimmable?
No. The striplight does not support dimming via mains dimmers or smart controls. Brightness is fixed at 685-690 lumens depending on the colour temperature selected.
What's included in the box?
The striplight ships with a 2m mains power cord, one linking coupler, fixing clips and adhesive pads for mounting. The LED is integrated and non-replaceable.