Description
Five metres of warm white light on a slim white tape, 10mm across. The tone sits at 3000K, warm without tipping into amber, and the diodes are set closely enough that the line reads as a soft band rather than a row of separate points. Light spreads broadly from the tape, so it washes a nearby surface evenly. There is no driver supplied with it; the tape needs a low voltage supply, and we keep drivers in stock to match the length you are lighting.
We reach for tape like this under kitchen wall units, along the back of open shelving, inside glazed cabinets and above coving where the light can bounce off the ceiling. It suits anyone who wants the source itself out of sight and only the glow showing. The white tape sits quietly against pale surfaces and inside aluminium channel. It switches on and off at full output rather than dimming, so it works best where one dependable level is all you need: a worktop, a display shelf, a hallway alcove.
The diodes sit on a flexible tape wound onto a reel, and the white finish keeps things unobtrusive where a sliver of it might show. The LEDs are built in, so there is nothing to swap out over the life of the tape. To clean it, switch off at the mains and run a dry, soft brush along the line to lift dust; it is not sealed against water, so keep damp cloths and steamy corners away from it. It carries a three year warranty. Across the range there are other colour temperatures, denser tape for a brighter and tighter line, and sealed versions for wetter spots.
Specification
| Colour |
White |
| Weight |
0.11KG |
| Length |
5000mm |
| Width |
10mm |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| LED per Metre |
60 LED/m |
| LED Power |
9.6W (±5%) |
| LED Voltage |
24V (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
16lm/W (±5%) |
| Beam Angle |
120° |
| System Flux |
766lm (±5%) |
| CRI |
>80 |
| Driver Included |
No |
| Type of Driver |
Constant Current |
| Voltage Required |
24V |
| Total Power Consumption |
48W (±5%) |
| Power per Metre (W/m) |
9.6W/m (±5%) |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
How many LEDs are on each metre?
There are 60 LEDs per metre, drawing 9.6W per metre and giving around 766 lumens per metre.
What driver do I need?
It runs on 24V, so you need a constant voltage 24V driver rated for the total wattage of the length you are using. A driver is not included with the reel.
Can I dim it?
No. This tape is non-dimmable and is designed to run at full output.
Is it suitable for a bathroom or outdoors?
No. This version is IP20, so it belongs in dry indoor positions. We stock IP65 tape in the same range for areas that see moisture.
How wide is the tape and how long is the reel?
The tape is 10mm wide and comes as a 5000mm reel, which is narrow enough for most standard aluminium profiles.
What sort of light does it give?
A warm white at 3000K with a wide 120 degree spread and CRI above 80, so colours on a worktop or shelf stay true.