Free Delivery on all orders over £99*

60W 24V Constant Voltage LED Driver - IP67 Weatherproof

£2599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 24DCIP60P is a 60W constant voltage LED driver that converts 230V 50Hz mains to 24V DC output, designed to power 24V LED strip modules, tape lighting and other low-voltage LED installations. The driver delivers stable voltage output regardless of load fluctuation, maintaining consistent brightness across the connected LED run.

Housed in a white polycarbonate enclosure rated to IP67, the driver is fully sealed against dust ingress and protected against temporary immersion, making it suitable for outdoor installations including garden lighting, decking underlighting, fascia lighting, and bathroom zones where moisture exposure is likely. The 155mm x 45mm x 32mm compact format allows the driver to be mounted in ceiling voids, behind fascia panels, or in external junction boxes without requiring excessive space.

Pre-wired with 0.3m mains input and low-voltage output cables, the driver simplifies installation by removing the need to wire into screw terminals. Built-in thermal shutdown and overload protection prevent damage from short circuits or excessive load, automatically resetting once the fault condition is cleared. The Class II construction provides double insulation without requiring an earth connection to the metal enclosure, improving safety in environments where earth bonding is difficult.

The driver is rated for continuous operation at full 60W load and carries a 3-year manufacturer warranty. It pairs with Knightsbridge's range of 24V LED strip products and is compatible with third-party 24V LED modules that fall within the 60W maximum output rating.

Specification
Length 155mm
Height 32mm
Width 45mm
Construction Polycarbonate
Finish White
IP Rating IP67
Class II
Primary Voltage 230V 50Hz
Cable Length 0.3m
Driver Type Constant Voltage
Warranty 3 Year Guarantee
Downloads

Product Specification Sheet

Frequently Asked

What voltage does this driver output?

The driver outputs 24V DC at a maximum of 60W. It is designed for use with 24V LED strip lighting, tape modules and other 24V LED installations that fall within the 60W power budget.

Can this be used outdoors?

Yes. The IP67 rating means the driver is fully dust-tight and protected against temporary immersion in water up to 1m depth for 30 minutes. It can be installed in outdoor locations, bathrooms and other wet environments, provided it is mounted in a position where water cannot pool around it continuously.

How is the driver wired?

The driver comes pre-wired with 0.3m input cable for connection to 230V mains and 0.3m output cable for connection to the LED load. The mains input must be connected via a fused spur or plug, and the low-voltage output connects directly to the LED strip or module terminals.

Does it require dimming capability?

This is a non-dimmable constant voltage driver. For dimmable installations, a separate mains dimmer or a dimmable driver model is required. Check the Knightsbridge range at Niori for dimmable alternatives if needed.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 24DCIP60P is a 60W constant voltage LED driver that converts 230V 50Hz mains to 24V DC output, designed to power 24V LED strip modules, tape lighting and other low-voltage LED installations. The driver delivers stable voltage output regardless of load fluctuation, maintaining consistent brightness across the connected LED run.

    Housed in a white polycarbonate enclosure rated to IP67, the driver is fully sealed against dust ingress and protected against temporary immersion, making it suitable for outdoor installations including garden lighting, decking underlighting, fascia lighting, and bathroom zones where moisture exposure is likely. The 155mm x 45mm x 32mm compact format allows the driver to be mounted in ceiling voids, behind fascia panels, or in external junction boxes without requiring excessive space.

    Pre-wired with 0.3m mains input and low-voltage output cables, the driver simplifies installation by removing the need to wire into screw terminals. Built-in thermal shutdown and overload protection prevent damage from short circuits or excessive load, automatically resetting once the fault condition is cleared. The Class II construction provides double insulation without requiring an earth connection to the metal enclosure, improving safety in environments where earth bonding is difficult.

    The driver is rated for continuous operation at full 60W load and carries a 3-year manufacturer warranty. It pairs with Knightsbridge's range of 24V LED strip products and is compatible with third-party 24V LED modules that fall within the 60W maximum output rating.

    Specification
    Length 155mm
    Height 32mm
    Width 45mm
    Construction Polycarbonate
    Finish White
    IP Rating IP67
    Class II
    Primary Voltage 230V 50Hz
    Cable Length 0.3m
    Driver Type Constant Voltage
    Warranty 3 Year Guarantee
    Downloads

    Product Specification Sheet

    Frequently Asked

    What voltage does this driver output?

    The driver outputs 24V DC at a maximum of 60W. It is designed for use with 24V LED strip lighting, tape modules and other 24V LED installations that fall within the 60W power budget.

    Can this be used outdoors?

    Yes. The IP67 rating means the driver is fully dust-tight and protected against temporary immersion in water up to 1m depth for 30 minutes. It can be installed in outdoor locations, bathrooms and other wet environments, provided it is mounted in a position where water cannot pool around it continuously.

    How is the driver wired?

    The driver comes pre-wired with 0.3m input cable for connection to 230V mains and 0.3m output cable for connection to the LED load. The mains input must be connected via a fused spur or plug, and the low-voltage output connects directly to the LED strip or module terminals.

    Does it require dimming capability?

    This is a non-dimmable constant voltage driver. For dimmable installations, a separate mains dimmer or a dimmable driver model is required. Check the Knightsbridge range at Niori for dimmable alternatives if needed.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.