Free Delivery on all orders over £99*

50W 24V Constant Voltage Dimmable LED Driver - Knightsbridge

£2999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 24DC50D is a 50W constant voltage LED driver that converts 230V mains to 24V DC output, designed for powering LED strip lighting, under-cabinet LED installations and low-voltage LED downlight systems. The driver delivers a stable 24V output up to a maximum load of 50W and is dimmable when paired with most trailing-edge dimmers.

Rated IP20 for internal use only, the driver suits installation in ceiling voids, under-cabinet cavities, behind lighting panels and other dry indoor locations where the unit will not be exposed to moisture. The compact 184mm × 61mm × 32mm ABS enclosure includes integral protections against open circuit, short circuit, overload and over-temperature conditions, shutting down automatically if any fault is detected and resuming output once the fault clears.

The Class II double-insulated construction provides SELV (Safety Extra Low Voltage) output, eliminating the need for an earth connection on the low-voltage side and simplifying installation in certain retrofit situations. The white ABS casing includes blue end caps with cable entry points and screw terminals for input and output connections. Dimmer compatibility should be verified before installation as performance varies between dimmer models and total connected load.

Specification
Length 184 mm
Height 32 mm
Width 61 mm
Construction ABS
Finish White
Class II
IP Rating IP20
Primary Voltage 230V 50Hz
Dimmable Trailing-edge only*
Driver Type Constant Voltage
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Is this driver dimmable with all dimmer types?

No. The 24DC50D is compatible with trailing-edge dimmers only. Leading-edge dimmers will not work reliably with this driver. Check dimmer compatibility with your specific dimmer model before installation, as performance can vary depending on total connected LED load.

What is the maximum LED strip length this driver can power?

That depends on the power consumption per metre of your LED strip. For example, a 10W/m strip can run up to 5 metres on this 50W driver. A 20W/m strip would be limited to 2.5 metres. Check the strip specification and do not exceed the 50W total output.

Can this be installed in a bathroom or outdoor location?

No. The IP20 rating means the driver is suitable for dry internal locations only. It must be installed in a ceiling void, under-cabinet space or similar dry area where it will not be exposed to moisture, condensation or direct water contact.

What does constant voltage mean compared to constant current?

Constant voltage drivers maintain a fixed output voltage (24V in this case) regardless of the connected load, making them suitable for LED strip and parallel LED circuits. Constant current drivers maintain a fixed current instead and are typically used for individual LED downlights or series-connected LEDs.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 24DC50D is a 50W constant voltage LED driver that converts 230V mains to 24V DC output, designed for powering LED strip lighting, under-cabinet LED installations and low-voltage LED downlight systems. The driver delivers a stable 24V output up to a maximum load of 50W and is dimmable when paired with most trailing-edge dimmers.

    Rated IP20 for internal use only, the driver suits installation in ceiling voids, under-cabinet cavities, behind lighting panels and other dry indoor locations where the unit will not be exposed to moisture. The compact 184mm × 61mm × 32mm ABS enclosure includes integral protections against open circuit, short circuit, overload and over-temperature conditions, shutting down automatically if any fault is detected and resuming output once the fault clears.

    The Class II double-insulated construction provides SELV (Safety Extra Low Voltage) output, eliminating the need for an earth connection on the low-voltage side and simplifying installation in certain retrofit situations. The white ABS casing includes blue end caps with cable entry points and screw terminals for input and output connections. Dimmer compatibility should be verified before installation as performance varies between dimmer models and total connected load.

    Specification
    Length 184 mm
    Height 32 mm
    Width 61 mm
    Construction ABS
    Finish White
    Class II
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Dimmable Trailing-edge only*
    Driver Type Constant Voltage
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Is this driver dimmable with all dimmer types?

    No. The 24DC50D is compatible with trailing-edge dimmers only. Leading-edge dimmers will not work reliably with this driver. Check dimmer compatibility with your specific dimmer model before installation, as performance can vary depending on total connected LED load.

    What is the maximum LED strip length this driver can power?

    That depends on the power consumption per metre of your LED strip. For example, a 10W/m strip can run up to 5 metres on this 50W driver. A 20W/m strip would be limited to 2.5 metres. Check the strip specification and do not exceed the 50W total output.

    Can this be installed in a bathroom or outdoor location?

    No. The IP20 rating means the driver is suitable for dry internal locations only. It must be installed in a ceiling void, under-cabinet space or similar dry area where it will not be exposed to moisture, condensation or direct water contact.

    What does constant voltage mean compared to constant current?

    Constant voltage drivers maintain a fixed output voltage (24V in this case) regardless of the connected load, making them suitable for LED strip and parallel LED circuits. Constant current drivers maintain a fixed current instead and are typically used for individual LED downlights or series-connected LEDs.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

    To arrange a return, call us on 020 8149 5199 or use our contact page.