Free Delivery on all orders over £99*

24V DC 150W LED Driver Power Supply IP67 193mm

£5499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This enclosed LED driver takes a 220-240V AC mains input and delivers a regulated 24V DC output at up to 150W, giving any 24V LED load a stable supply. The decoded TRETO build is rated IP67, so it copes with damp, dust and sheltered outdoor positions where a standard indoor driver would not survive, and the sealed white plastic housing measures 193 × 52 × 37 mm.

Match the driver to the total wattage of your run, keeping the connected load comfortably below the 150W ceiling, and confirm your strip or module is a 24V type rather than 12V before wiring. It powers 24V LED strips, COB tape and compatible LED modules, feeding them through a profile or directly along a run. We also stock the 24V LED strips, COB tape and LED modules this driver is built to power, along with the profiles to house them.

Specification
Output 24V DC 150W
Input voltage 220-240 AC
IP rating IP67
Material Plastic
Colour White
Dimensions 193 × 52 × 37 mm
Frequently Asked

What can this driver power?

It supplies any 24V DC LED load, such as 24V LED strips, COB tape and compatible LED modules, up to a total of 150W. Always check that the connected wattage stays within the 150W rating and that your strip is a 24V type.

Is it suitable for outdoor or damp use?

Yes. The IP67 rating means it is sealed against dust and the effects of temporary immersion, so it suits damp utility areas, gardens and sheltered outdoor runs. For fully exposed positions, mount it in a protected enclosure where practical.

What input voltage does it need?

It runs from a standard 220-240V AC mains supply and converts that to a regulated 24V DC output. It should be wired in by a competent electrician in line with the wiring regulations.

Will it work with a 12V LED strip?

No. This is a 24V DC driver and must be paired with 24V LED loads only. Using it with a 12V strip would over-drive the strip, so check the strip voltage before connecting.

Downloads

Product Specification Sheet

Range Datasheet

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This enclosed LED driver takes a 220-240V AC mains input and delivers a regulated 24V DC output at up to 150W, giving any 24V LED load a stable supply. The decoded TRETO build is rated IP67, so it copes with damp, dust and sheltered outdoor positions where a standard indoor driver would not survive, and the sealed white plastic housing measures 193 × 52 × 37 mm.

    Match the driver to the total wattage of your run, keeping the connected load comfortably below the 150W ceiling, and confirm your strip or module is a 24V type rather than 12V before wiring. It powers 24V LED strips, COB tape and compatible LED modules, feeding them through a profile or directly along a run. We also stock the 24V LED strips, COB tape and LED modules this driver is built to power, along with the profiles to house them.

    Specification
    Output 24V DC 150W
    Input voltage 220-240 AC
    IP rating IP67
    Material Plastic
    Colour White
    Dimensions 193 × 52 × 37 mm
    Frequently Asked

    What can this driver power?

    It supplies any 24V DC LED load, such as 24V LED strips, COB tape and compatible LED modules, up to a total of 150W. Always check that the connected wattage stays within the 150W rating and that your strip is a 24V type.

    Is it suitable for outdoor or damp use?

    Yes. The IP67 rating means it is sealed against dust and the effects of temporary immersion, so it suits damp utility areas, gardens and sheltered outdoor runs. For fully exposed positions, mount it in a protected enclosure where practical.

    What input voltage does it need?

    It runs from a standard 220-240V AC mains supply and converts that to a regulated 24V DC output. It should be wired in by a competent electrician in line with the wiring regulations.

    Will it work with a 12V LED strip?

    No. This is a 24V DC driver and must be paired with 24V LED loads only. Using it with a 12V strip would over-drive the strip, so check the strip voltage before connecting.

    Downloads

    Product Specification Sheet

    Range Datasheet

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.