Description
This is a flexible warm white strip on a 5m reel, ready to be cut to length and run along a shelf, a plinth or the underside of a cabinet. The board is white, so it disappears against pale joinery, and at 10mm across it slips into slim aluminium channels without fuss. With 120 LEDs per metre the light reads as a continuous line rather than a row of dots, which is what you want on any surface where the strip itself sits in view. The LEDs are integrated, and the output is fixed rather than dimmable.
We reach for this density under kitchen wall units, inside wardrobes and dressers, along cove details and behind headboards, anywhere a soft warm wash needs to do the work without a visible fitting. It suits kitchens, hallways and living rooms that stay dry; where the run passes through a bathroom or an outdoor soffit, we stock the same warm white strip in an IP65 version. A low voltage driver is required and is bought separately, sized to the length of strip you actually use, and we are happy to match one to your run.
The strip is supplied on a reel and stays pliable enough to follow a gentle curve, with the solder points spaced for cutting between LEDs. Warm white keeps timber, brass and cream paint looking their best, which is why it is our usual choice for domestic joinery. For upkeep, isolate the supply first, then lift dust from the face of the strip with a dry brush or a lint free cloth, and keep cleaning sprays and solvents off the LEDs and contacts. It carries a three year warranty. The same strip is made in cooler white tones and in both a sparser and a denser LED spacing, so you can keep one look across a whole house while changing the brightness room by room.
Specification
| Colour |
White |
| Weight |
0.12KG |
| Length |
5000mm |
| Width |
10mm |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| LED per Metre |
120 LED/m |
| LED Power |
14.4W (±5%) |
| LED Voltage |
24V (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
16lm/W (±5%) |
| Beam Angle |
120° |
| System Flux |
1155lm (±5%) |
| CRI |
>80 |
| Driver Included |
No |
| Type of Driver |
Constant Current |
| Voltage Required |
24V |
| Total Power Consumption |
72W (±5%) |
| Power per Metre (W/m) |
14.4W/m (±5%) |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What driver do I need?
The strip runs at 24V, and no driver is included. Choose a constant voltage 24V driver rated above the total load of the length you install: the strip draws 14.4W per metre, so a full 5m reel needs at least 72W of capacity, plus headroom.
Can I cut it to length?
Yes. It is designed to be cut between the LED groups, so you can trim a 5m reel down to the run you need. Offcuts can be reconnected with the appropriate solderless connectors or by soldering.
How bright is it?
It gives around 1155 lumens per metre at 3000K warm white, with a wide 120 degree spread, which suits indirect and task lighting under cabinets and shelves.
Will it work with a dimmer?
No, this strip is non-dimmable. Wire it to a switched circuit rather than a dimmer.
Is it suitable for a bathroom?
This version is IP20, so keep it to dry areas. For splash zones and covered outdoor use, choose the IP65 version of the same warm white strip.
How long should it last?
The LEDs are rated for an average life of 30,000 hours, and the product carries a three year warranty.