Free Delivery on all orders over £99*

12V DC 100W LED Driver Power Supply IP67 166mm

£3899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This enclosed LED driver takes a 220-240V AC mains input and steps it down to a stable 12V DC output, rated at 100W. The sealed plastic housing measures 166 x 43 x 33 mm and carries an IP67 rating, so it copes with dust, damp and sheltered outdoor positions where an indoor driver would not be suitable. It supplies power to low-voltage LED loads and does not itself produce any light.

Any 12V DC LED strip, module or profile run drawing up to 100W can be wired to its output, leaving plenty of headroom for longer runs or grouped fittings. Match the load voltage to 12V and keep the total wattage within the 100W limit. We also stock the 12V LED strips, COB tape and LED modules this unit is built to power, along with connectors to wire them in.

Specification
Output 12V DC 100W
Input voltage 220-240 AC
IP rating IP67
Material Plastic
Colour White
Dimensions 166 × 43 × 33 mm
Frequently Asked

What does this driver power?

It powers 12V DC LED loads such as flexible strips, COB tape, LED modules and profile runs. Keep the load at 12V and within the 100W rated output.

Can it be used outdoors?

Yes. The IP67 rating means it is protected against dust and temporary immersion, so it suits damp, exposed and sheltered outdoor locations as well as indoor use.

What is the maximum load I can connect?

The driver delivers up to 100W at 12V DC. Add up the wattage of every fitting on the run and keep the total below 100W, allowing a little spare capacity for reliability.

How is it wired in?

The 220-240V AC mains supply connects to the input side and the 12V DC LED load to the output side. Wiring should be carried out by a competent person in line with local electrical regulations.

Downloads

Product Specification Sheet

Range Datasheet

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This enclosed LED driver takes a 220-240V AC mains input and steps it down to a stable 12V DC output, rated at 100W. The sealed plastic housing measures 166 x 43 x 33 mm and carries an IP67 rating, so it copes with dust, damp and sheltered outdoor positions where an indoor driver would not be suitable. It supplies power to low-voltage LED loads and does not itself produce any light.

    Any 12V DC LED strip, module or profile run drawing up to 100W can be wired to its output, leaving plenty of headroom for longer runs or grouped fittings. Match the load voltage to 12V and keep the total wattage within the 100W limit. We also stock the 12V LED strips, COB tape and LED modules this unit is built to power, along with connectors to wire them in.

    Specification
    Output 12V DC 100W
    Input voltage 220-240 AC
    IP rating IP67
    Material Plastic
    Colour White
    Dimensions 166 × 43 × 33 mm
    Frequently Asked

    What does this driver power?

    It powers 12V DC LED loads such as flexible strips, COB tape, LED modules and profile runs. Keep the load at 12V and within the 100W rated output.

    Can it be used outdoors?

    Yes. The IP67 rating means it is protected against dust and temporary immersion, so it suits damp, exposed and sheltered outdoor locations as well as indoor use.

    What is the maximum load I can connect?

    The driver delivers up to 100W at 12V DC. Add up the wattage of every fitting on the run and keep the total below 100W, allowing a little spare capacity for reliability.

    How is it wired in?

    The 220-240V AC mains supply connects to the input side and the 12V DC LED load to the output side. Wiring should be carried out by a competent person in line with local electrical regulations.

    Downloads

    Product Specification Sheet

    Range Datasheet

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.