Free Delivery on all orders over £99*

1 Gang 2-Way 10-200W (5-150W LED) Intelligent Dimmer - Brushed Chrome Square Edge

£1699
The RRP is the manufacturer's recommended retail price of the item.
150 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CS2191BC is a 1-gang 2-way intelligent dimmer rated at 10-200W for incandescent and halogen loads, or 5-150W for dimmable LED bulbs. The dimmer switches between trailing-edge and leading-edge modes via a front-panel control knob, allowing it to adapt to different lamp types without rewiring. It ships pre-set in trailing-edge mode, optimised for modern LED bulbs.

Designed for bedrooms, living rooms, offices and hallways where lighting levels need to be varied throughout the day, the dimmer operates via a rotary push on/off action with continuous dimming as you turn the knob. The 2-way configuration allows the same light to be controlled from two switch positions in the room, making it suitable for larger spaces with entry points at opposite ends. The unit requires a 25mm minimum back box depth and fits standard UK single-gang apertures.

The brushed chrome faceplate is a flat square-edge design with a low 10.5mm projection from the wall once fitted. The matching brushed chrome dimmer cap integrates visually with the plate, giving a unified finish rather than a contrasting control element. The steel construction includes overload and overheat protection plus an inrush current limiter to handle the initial surge when lamps are switched on, reducing stress on both the dimmer and the bulbs.

The dimmer must be used with lamps of the same type and preferably the same brand and wattage on a single circuit to avoid interference and ensure smooth dimming performance. Mixing LED brands or combining incandescent with LED on the same dimmer can cause flickering or incomplete dimming range.

Specification
Height 89 mm
Width 89 mm
Projection 10.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Chrome
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge modes?

Trailing-edge (the factory default) suits most dimmable LED and low-voltage halogen bulbs. Leading-edge suits traditional incandescent and mains-voltage halogen. The dimmer ships in trailing-edge mode and can be switched to leading-edge via the front control knob if needed for your specific lamp type.

Can I mix LED and incandescent bulbs on the same dimmer?

No. The dimmer must be used with lamps of the same type on a single circuit. Mixing incandescent with LED, or mixing different LED brands or wattages, can cause flickering, buzzing or incomplete dimming range.

What does 2-way mean?

2-way allows the same light to be controlled from two separate switch positions in the room, such as opposite ends of a hallway or bedroom. You need a second 2-way switch at the other location, wired in a standard 2-way lighting circuit.

What back box depth is required?

A 25mm minimum back box depth is needed. The faceplate adds 10.5mm of projection from the wall once the dimmer is fitted.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CS2191BC is a 1-gang 2-way intelligent dimmer rated at 10-200W for incandescent and halogen loads, or 5-150W for dimmable LED bulbs. The dimmer switches between trailing-edge and leading-edge modes via a front-panel control knob, allowing it to adapt to different lamp types without rewiring. It ships pre-set in trailing-edge mode, optimised for modern LED bulbs.

    Designed for bedrooms, living rooms, offices and hallways where lighting levels need to be varied throughout the day, the dimmer operates via a rotary push on/off action with continuous dimming as you turn the knob. The 2-way configuration allows the same light to be controlled from two switch positions in the room, making it suitable for larger spaces with entry points at opposite ends. The unit requires a 25mm minimum back box depth and fits standard UK single-gang apertures.

    The brushed chrome faceplate is a flat square-edge design with a low 10.5mm projection from the wall once fitted. The matching brushed chrome dimmer cap integrates visually with the plate, giving a unified finish rather than a contrasting control element. The steel construction includes overload and overheat protection plus an inrush current limiter to handle the initial surge when lamps are switched on, reducing stress on both the dimmer and the bulbs.

    The dimmer must be used with lamps of the same type and preferably the same brand and wattage on a single circuit to avoid interference and ensure smooth dimming performance. Mixing LED brands or combining incandescent with LED on the same dimmer can cause flickering or incomplete dimming range.

    Specification
    Height 89 mm
    Width 89 mm
    Projection 10.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Chrome
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge modes?

    Trailing-edge (the factory default) suits most dimmable LED and low-voltage halogen bulbs. Leading-edge suits traditional incandescent and mains-voltage halogen. The dimmer ships in trailing-edge mode and can be switched to leading-edge via the front control knob if needed for your specific lamp type.

    Can I mix LED and incandescent bulbs on the same dimmer?

    No. The dimmer must be used with lamps of the same type on a single circuit. Mixing incandescent with LED, or mixing different LED brands or wattages, can cause flickering, buzzing or incomplete dimming range.

    What does 2-way mean?

    2-way allows the same light to be controlled from two separate switch positions in the room, such as opposite ends of a hallway or bedroom. You need a second 2-way switch at the other location, wired in a standard 2-way lighting circuit.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The faceplate adds 10.5mm of projection from the wall once the dimmer is fitted.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.