Description
The Valmora is a flush LED ceiling light in chrome, with four slim, gently curved bars that cross in pairs over a square chrome base. The body is aluminium and each bar has a white plastic shade, so the integrated LEDs show as soft lines of light rather than bright points. It is 56cm long, 56cm wide and 10.5cm high, so it keeps close to the ceiling while spreading wide. There are four lights of 5.2W each, every one giving 700 lumens at 3000K, a warm white. The IP20 rating settles where it goes: indoors and dry, so a living room, bedroom or hallway, never a bathroom or porch.
Because it sits close to the ceiling, we suggest the Valmora for rooms where a pendant would hang too low, such as a bedroom with a modest ceiling height, a landing or a kitchen-diner. The criss-cross bars spread their glow across the ceiling rather than throwing it down from one point, so the whole room feels softly lit. At 56cm across each way it sits well in the middle of a living room or main bedroom, where the chrome catches the light and the white bars keep the glow gentle. It suits anyone who wants a modern ceiling light with real presence.
The LEDs are integrated, so there are no bulbs to buy or change. The light is not dimmable and has no switch of its own, as it is switched at the wall. It has an energy class of E and weighs 1.336KG packed. As a mains fitting wired into the ceiling, it is installed by a qualified electrician, and the installation instructions are available as a download. A soft, dry cloth keeps the chrome and the white bars free of dust. Before you order, measure the space: at 56cm wide and 56cm long, it needs a clear stretch of ceiling away from beams.
Specification
| Length |
56cm |
| Width |
56cm |
| Height |
10.5cm |
| Body Material |
Aluminium |
| Body Colour |
Chrome |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
4 x 5.2W |
| Lumens |
700lm per light (4 lights) |
| Colour Temperature |
3000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Weight (packed) |
1.336KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Valmora go in a bathroom?
No. It is rated IP20, which means it is for dry indoor rooms only, so we suggest a living room, bedroom, hallway or landing instead.
Is the Valmora dimmable?
No, this light is not dimmable. It has no switch of its own and is switched at the wall, giving a steady warm white light at 3000K.
How bright is the light?
There are four integrated LED lights of 5.2W each, and each one gives 700 lumens, with a warm white colour temperature of 3000K.
How big is the ceiling light?
It is 56cm long, 56cm wide and 10.5cm high, so it sits close to the ceiling while its four bars spread across a wide square area.
Do I need to buy bulbs?
No bulbs are needed. The LEDs are integrated into the four bars, so the light source is built in and there is nothing to fit or replace.
Which materials are used?
The body is aluminium with a chrome finish, and the four bars have white plastic shades that soften the light from the LEDs.