Description
The TorlanECO 4ft LED batten is a 1250mm polycarbonate-bodied utility fitting delivering 3710 lumens at 5700K daylight from an integrated 36W LED. The IP65-rated housing protects against dust ingress and water jets, making it suitable for garages, storage areas, cycle sheds, plant rooms, and commercial utility spaces where moisture or dust is present.
Designed for fast installation, the batten uses fast-fix brackets that clip onto the rear housing and align with BESA boxes for straightforward retrofits. The push-fit wiring terminals accept cable without needing to strip multiple millimetres of insulation or fumble with screws in awkward ceiling voids. A hinged gear tray allows access to the driver and connections without removing the batten from the ceiling, reducing maintenance time when re-terminating or replacing drivers.
The opal polycarbonate diffuser spreads the 125-degree beam evenly across work surfaces, storage racks, and walkways without creating harsh hotspots or glare. At 35mm high and 53mm wide, the slim profile keeps the batten unobtrusive on low ceilings where traditional fluorescent tubes and their control gear would project further. The IK06 impact rating gives basic protection against knocks from ladders, tools, and equipment in active work environments.
The integrated LED has an L70B50 lifespan of 30,000 hours — approximately 10 years under typical utility space usage — and delivers 105 lumens per watt at the light source. The Class II construction means no earth connection is required during installation. The non-dimmable driver runs on 230V 50Hz mains and carries a 3-year manufacturer warranty.
Specification
| Length |
1250mm |
| Height |
35mm |
| Width |
53mm |
| Construction |
Polycarbonate |
| Finish |
White |
| IP Rating |
IP65 |
| Class |
II |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Opal |
| Lamp Technology |
LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
30000 |
| Energy Rating (Class) post 2021 SLR |
E |
| Beam Angle |
125 |
| CCT |
5700K |
| Light Colour |
Daylight |
| Lumens |
3710lm |
| Lumens (Light source only) |
4645lm |
| Wattage |
36W |
| Efficacy (Light source) |
105lm/W |
| CRI |
>80 |
| Warranty |
3 Year Guarantee |
Downloads
Product Specification Sheet
Frequently Asked
Is this batten suitable for damp or outdoor use?
Yes. The IP65 rating protects against dust ingress and water jets, making it suitable for garages, covered outdoor areas, cycle sheds, and plant rooms where moisture or dust is present. It is not fully weatherproof for uncovered outdoor mounting exposed to direct rainfall.
What does the fast-fix mounting system involve?
The batten uses brackets that clip onto the rear housing and align with standard BESA boxes or direct ceiling fixings. Push-fit wiring terminals accept mains cable without needing screwdrivers at the terminal block, reducing installation time compared to traditional screw-terminal battens.
Can the driver be accessed without removing the batten?
Yes. The gear tray is hinged, allowing access to the driver and wiring connections while the batten remains fixed to the ceiling. This simplifies maintenance and driver replacement.
What colour temperature is 5700K?
5700K is classified as daylight — a cool, neutral white with a slightly blue cast. It provides high contrast and clarity for task lighting in workshops, storage areas, and utility spaces where visibility is prioritised over ambience.