Description
This steel kit lets you hang a batten light from the ceiling on steel cable, rather than fixing it flat against the surface. It brings together steel cable with cable grippers, dome caps, threaded bushes, hex nuts and toothed washers, all in a bright silver colour that sits neatly with the clean lines of a modern batten. The kit is 1.5m long, measuring 1500mm from end to end and 11mm wide and deep at its largest part, and it weighs just 0.08KG, so it is light and easy to handle up a ladder. It comes with a 5-year extended warranty.
Hanging a batten brings its light down from a high ceiling towards the work beneath, which is why we see kits like this most often in warehouses, workshops, stockrooms and offices with high or open ceilings. It suits trade customers fitting out a commercial unit just as well as home customers lighting a workshop, and a run of battens hung on steel cable gives a tidy, industrial look over benches, aisles and desks. Because the light now hangs closer to the task, it falls more directly where it is needed, rather than being lost in the space overhead.
Every part of the kit is steel, from the cable itself to the grippers, caps, bushes, nuts and washers, so the whole set is made from one material and looks consistent once hung. It fits LED batten lights, and it is made to carry one below the ceiling on cable rather than fixed directly to it. The batten itself is a mains fitting, so it is installed by a qualified electrician, and the kit is put up as part of that same job. With the batten hung, you get a clean, simple line of light at a working height, held on slim steel cable that keeps the look light and uncluttered.
Specification
| Dimensions |
1500 x 11 x 11mm |
| Material |
Steel |
| Warranty |
5 years (extended) |
| Weight |
0.08KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
How long is this batten hanging kit?
The kit is 1.5m long, measuring 1500mm from end to end, and it is 11mm wide and deep at its largest part.
What is the kit made of?
Every part is steel, from the cable to the grippers, caps, bushes, nuts and washers, and the whole kit weighs just 0.08KG.
Is the batten light included with the kit?
No. This is the hanging kit alone, made up of steel cable and its fittings, ready to carry a batten you already have or are buying.
Where would a hanging batten work best?
We see hung battens most often indoors in warehouses, workshops, stockrooms and offices with high or open ceilings, where lowering the light brings it closer to the work.
Who should put the kit up?
The batten is a mains fitting, so it is installed by a qualified electrician, and the kit is put up as part of that same job.