Description
Clear crystal glass rings the outside of this lamp, set against a polished chrome frame, with an opal white glass diffuser sitting behind it to soften the candle lamps. It is 30cm across, a size that fills a console table or a wide sideboard without swallowing it. The light works twice over: an even glow through the opal glass, and small bright points where that glow catches the cut crystal. An inline switch on the flex puts the control within easy reach.
This is a lamp for the rooms where you want a bit of sparkle at low level rather than overhead: a hallway console, a dressing table, a pair either side of a bed, a side table in a sitting room. We would fit LED candle lamps in it and keep them warm in tone, which suits the chrome and stops the crystal looking cold. Because it will dim with compatible LED candles and a suitable dimmer, it can be run bright for reading and taken right down for the end of the evening.
The chrome is polished to a bright mirror finish and the crystal is clear cut glass, so both show fingermarks readily; a dry lint-free cloth over the crystal and a barely damp one on the metal keeps it looking right, with everything unplugged and cool before you start. Each socket takes up to 10W, which is ample in LED. It carries a one year warranty. We stock the same table lamp in antique brass, and the range carries on into wall lights and flush ceiling lights in both finishes if you want the crystal to run through a room. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Handcrafted |
Yes |
| Weight |
3.38KG |
| Diameter |
300mm |
| Height |
500mm |
| Materials Used |
Iron, Glass, Crystal |
| Adjustable Height |
No |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Crystal Type |
Deco Select |
| Crystal Colour |
Clear |
| Lamp |
2 x E14 10W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Base Dimensions (mm) |
D:170mm x H:25mm |
| Cable Information |
3 x 0.75mm clear double insulated cord with ON/OFF switch, L:1800mm, BS plug |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
Yes-Glass To Be Attached |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. (4) For best results when cleaning glass, remove from fitting first. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Two E14 candle lamps, up to 10W each. LED candle lamps in the C35 shape are the ones we would choose, and they are not supplied with the lamp.
Can it be dimmed?
Yes, provided you use dimmable LED candle lamps together with a compatible dimmer. Neither the lamps nor a dimmer are included.
What are the dimensions?
It is 30cm in diameter and 50cm high, and weighs 3.38kg, so it needs a table that can take a little weight.
Is the crystal clear or tinted?
The crystal glass is clear, and the inner diffuser is opal white glass, which is what gives the softer, even light.
How is it switched?
There is an inline switch on the flex, so you can operate it without reaching under the shade.
How should I clean the crystal?
Unplug it and let the lamps cool, then dust the crystal with a dry lint-free cloth. Fingermarks on the chrome come off with a slightly damp cloth and a dry buff afterwards. Avoid sprays and abrasive cleaners.