Description
This round wall mounted LED step light is a compact fitting for lighting steps and paths at low level. It has an integrated LED, so there is no bulb to buy or change, and it gives a warm white 3000K light from 2.6W, at 50 lumens, with a colour rendering above 80 so stone, brick and timber look true to colour. The light comes through a half-moon window across the lower half of the round face. The body is 316 stainless steel in a stainless steel finish, and it measures 100mm by 100mm across the face and 93mm deep, weighing 1.17KG.
Its IP65 rating means it is made for outdoor use, so it suits garden steps, patio and decking steps, outside walls along a path, and walkways and pathways around the front of a house or a commercial building. Set a row of them low in the wall beside a flight of steps and each tread is easy to see after dark. It works just as well indoors, on a staircase or along a hallway or corridor where a gentle low light helps people find their footing at night.
It is recessed into the wall and needs an 80mm cut-out. It runs straight from the mains at 220-240V AC, so there is no separate driver to buy, and it is installed by a qualified electrician. It is non-dimmable, so it suits an ordinary on and off switch rather than a dimmer. The LED is rated for 70,000 hours to L70, meaning it still gives at least 70 per cent of its original light at that point, and the fitting is rated for an ambient temperature of 35°C. It comes with a 7-year warranty, and once your electrician has fitted it there is no bulb to change.
Specification
| Light Source |
Integrated LED |
| Wattage |
2.6W |
| Lumens |
50lm |
| Efficacy |
19lm/W |
| Colour Temperature |
3000K |
| Colour Rendering |
CRI>80 |
| IP Rating |
IP65 |
| Dimming |
Non-Dimmable |
| Cut-Out |
80mm |
| Dimensions |
100 x 100 x 93mm |
| Material |
Stainless Steel 316 |
| Finish |
Stainless Steel |
| Input Voltage |
220-240V AC |
| Electrical Class |
Class I |
| Rated Life |
70,000 hours (L70) |
| Mounting |
Wall |
| Ambient Temperature |
35°C |
| Warranty |
7 years |
| Weight |
1.17KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
Can this step light be used outdoors?
Yes. It is rated IP65 and made for outdoor use, so it suits garden steps, outside walls, patios and pathways as well as indoor stairs.
What size hole does it need in the wall?
It is recessed into the wall and needs an 80mm cut-out. The face measures 100mm by 100mm and the fitting is 93mm deep.
Can I dim this step light?
No. It is non-dimmable, so it should go on an ordinary on and off switch rather than a dimmer circuit.
What colour is the light and how bright is it?
It gives a warm white 3000K light at 50 lumens from 2.6W, a soft low level glow for marking steps and paths after dark.
Does it need a driver or transformer?
No. It has an integrated LED and runs straight from the mains at 220-240V AC, and it is installed by a qualified electrician.