Free Delivery on all orders over £99*

RJ45 Network Outlet - Black Nickel Screwless

£1299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge RJ45 network outlet provides a single shuttered CAT5e Ethernet port behind a black nickel screwless faceplate. The outlet uses IDC (insulation displacement connector) terminals on the rear, allowing standard UTP network cable to be terminated without stripping individual conductors. A termination tool is included with the outlet.

Designed for hardwired networking points in home offices, media rooms, and areas where Wi-Fi signal is inconsistent or insufficient for high-bandwidth tasks like file transfers, streaming and gaming. The shuttered port keeps dust and debris out of the RJ45 socket when not in use, and the built-in gasket behind the faceplate provides a clean seal against the wall surface.

The screwless cover plate clips onto a separate steel sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The black nickel finish provides a dark metallic accent that pairs with contemporary, industrial and monochrome interiors. A write-on designation label on the rear of the faceplate allows the outlet to be identified during installation or future maintenance. The outlet is certified to BS 5733 and carries an IP20 rating for indoor dry-location use.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 4.3 mm
Min. Mounting Box Depth 35mm
Construction Premium grade steel
Finish Black Nickel
IP Rating IP20
Terminal IDC
Warranty 2
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What category of network cable does this outlet support?

The outlet is rated for CAT5e UTP (unshielded twisted pair) cable, which supports Gigabit Ethernet speeds up to 1000 Mbps over cable runs up to 100 metres. It will also accept CAT6 cable if already installed, though the outlet itself is CAT5e-rated.

What back box depth is required?

A 35mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.

Is a termination tool included?

Yes. The outlet ships with an IDC termination tool for punching down the cable conductors onto the rear terminals without stripping the insulation from individual wires.

Is the screwless plate removable for redecorating?

Yes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the outlet and re-clipped without disturbing the cable terminations.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge RJ45 network outlet provides a single shuttered CAT5e Ethernet port behind a black nickel screwless faceplate. The outlet uses IDC (insulation displacement connector) terminals on the rear, allowing standard UTP network cable to be terminated without stripping individual conductors. A termination tool is included with the outlet.

    Designed for hardwired networking points in home offices, media rooms, and areas where Wi-Fi signal is inconsistent or insufficient for high-bandwidth tasks like file transfers, streaming and gaming. The shuttered port keeps dust and debris out of the RJ45 socket when not in use, and the built-in gasket behind the faceplate provides a clean seal against the wall surface.

    The screwless cover plate clips onto a separate steel sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The black nickel finish provides a dark metallic accent that pairs with contemporary, industrial and monochrome interiors. A write-on designation label on the rear of the faceplate allows the outlet to be identified during installation or future maintenance. The outlet is certified to BS 5733 and carries an IP20 rating for indoor dry-location use.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 4.3 mm
    Min. Mounting Box Depth 35mm
    Construction Premium grade steel
    Finish Black Nickel
    IP Rating IP20
    Terminal IDC
    Warranty 2
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What category of network cable does this outlet support?

    The outlet is rated for CAT5e UTP (unshielded twisted pair) cable, which supports Gigabit Ethernet speeds up to 1000 Mbps over cable runs up to 100 metres. It will also accept CAT6 cable if already installed, though the outlet itself is CAT5e-rated.

    What back box depth is required?

    A 35mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.

    Is a termination tool included?

    Yes. The outlet ships with an IDC termination tool for punching down the cable conductors onto the rear terminals without stripping the insulation from individual wires.

    Is the screwless plate removable for redecorating?

    Yes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the outlet and re-clipped without disturbing the cable terminations.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

    To arrange a return, call us on 020 8149 5199 or use our contact page.