Description
The REGIS is a recessed louvre troffer built for suspended-ceiling grids in offices and commercial interiors. It seats into a standard drop-ceiling module and holds four T8 LED tubes on G13 caps, each rated up to 18W, so the fitting carries a total of up to 72W across the four lamps. The louvre format shields the tubes behind a reflective grid, which keeps direct glare off screens and desks while spreading an even wash of light across the working plane below. As a recessed grid luminaire, this is the format US specifiers know as a troffer, the workhorse of office ceilings.
The square 625 by 595 mm body is sized to drop into a typical 600 grid, sitting flush with the ceiling tiles around it. It suits open-plan offices, meeting rooms, reception areas, classrooms and similar commercial spaces where a clean, low-glare ceiling line matters. Rather than acting as ambient mood lighting, the louvre directs output downward over the immediate floor area beneath each unit, so coverage is best planned by spacing several troffers across the grid to keep light levels consistent at desk height. Mounting height follows the suspended ceiling, with the louvre keeping the source out of direct view at normal seated and standing angles.
Construction is steel with a white finish, giving a robust shell that holds its shape within the grid. The fitting is recessed into the ceiling and is not designed for surface or wall mounting. It runs on 220 to 240V AC and is rated IP20, which means dry indoor use only and not damp, wet or outdoor locations. The G13 T8 LED tubes can be replaced individually if needed, which keeps long-term upkeep straightforward. This unit is part of the wider Regis range of commercial ceiling fittings we stock.
Specification
| Power |
4 x max 18W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Cap / base |
G13 |
| Light source |
T8 LED |
| Shape |
Square |
| Dimensions |
625 × 595 × 78 mm |
| Weight |
2.28 kg |
| Material |
Steel |
| Finish |
White |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Does it fit a standard suspended ceiling grid?
Yes. The square 625 by 595 mm body is sized to recess into a typical 600 module drop-ceiling grid, sitting flush with the surrounding tiles. It is designed for recessed grid installation only, not surface or wall mounting.
What tubes does it take and can they be replaced?
It uses four T8 LED tubes on G13 caps, each rated up to 18W, for a total of up to 72W. The tubes locate on the G13 holders and can be replaced individually, so a single failed lamp does not mean swapping the whole fitting.
How many do I need for an office?
Plan by spacing several units evenly across the ceiling grid to keep light consistent at desk height, since each louvre directs output over the area immediately below it. Spacing depends on room size, ceiling height and the lux level you want on the working plane.
How do I clean the louvre?
Wipe the reflective louvre and frame with a soft, dry or barely damp cloth once power is off and the unit has cooled. Avoid harsh solvents that could dull the white finish, and never use water freely as the fitting is rated IP20 for dry indoor use only.