Free Delivery on all orders over £99*

Programming Remote Control for POTHBMS High Bay Sensor

£999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge POTHBRC is a wireless infrared remote control designed to programme the POTHBMS high bay microwave sensor without accessing the luminaire. The remote allows adjustment of brightness output, hold time, standby dim level, standby time, motion sensitivity and daylight threshold from ground level, removing the need for ladders or scissor lifts to adjust sensor behaviour after installation.

Designed for warehouses, industrial units and commercial spaces with ceiling heights above 4m where the POTHBMS sensor is fitted, the remote transmits infrared commands to the sensor from distances up to 10m. Six parameter groups can be adjusted: brightness (70%, 80%, 90%, 100%), hold time after last motion detected (10s, 1m, 10m, 30m), standby dim level when no motion is detected (10%, 20%, 30%, 50%), standby time before entering standby mode (∞, 1m, 30m, 60m), motion sensitivity (20%, 50%, 75%, 100%), and daylight threshold at which the sensor stops triggering lights (10 lux, 30 lux, 50 lux, 100 lux).

The polycarbonate housing measures 140mm tall by 50mm wide with an 18mm profile, and the buttons use tactile dome switches with printed icons for each function. The remote includes ON/OFF, SEND (to transmit settings to the sensor), RESET (to restore factory defaults), and TEST (to check sensor response) controls. A five-year warranty covers the remote and its electronic components.

Specification
Height 140 mm
Width 50 mm
Projection 18 mm
Construction Polycarbonate
Finish Black
Warranty 5
Downloads

Product Specification Sheet

Frequently Asked

What sensors is this remote compatible with?

This remote is designed specifically for the Knightsbridge POTHBMS high bay microwave sensor. It will not control other sensor models or brands.

What range does the remote have?

The infrared transmitter works at distances up to 10m from the sensor, allowing programming from ground level in most warehouse and industrial installations. Direct line of sight between the remote and the sensor's infrared receiver is required.

Can multiple sensors be programmed at once?

Yes. If multiple POTHBMS sensors are within infrared range when you press SEND, they will all receive the same settings. This allows you to programme an entire bay area simultaneously without adjusting each sensor individually.

What happens if I press RESET?

The RESET button restores the sensor to Knightsbridge factory default settings (typically 100% brightness, 10-minute hold time, and other standard parameters). Use this when troubleshooting or when taking over a site where previous settings are unknown.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge POTHBRC is a wireless infrared remote control designed to programme the POTHBMS high bay microwave sensor without accessing the luminaire. The remote allows adjustment of brightness output, hold time, standby dim level, standby time, motion sensitivity and daylight threshold from ground level, removing the need for ladders or scissor lifts to adjust sensor behaviour after installation.

    Designed for warehouses, industrial units and commercial spaces with ceiling heights above 4m where the POTHBMS sensor is fitted, the remote transmits infrared commands to the sensor from distances up to 10m. Six parameter groups can be adjusted: brightness (70%, 80%, 90%, 100%), hold time after last motion detected (10s, 1m, 10m, 30m), standby dim level when no motion is detected (10%, 20%, 30%, 50%), standby time before entering standby mode (∞, 1m, 30m, 60m), motion sensitivity (20%, 50%, 75%, 100%), and daylight threshold at which the sensor stops triggering lights (10 lux, 30 lux, 50 lux, 100 lux).

    The polycarbonate housing measures 140mm tall by 50mm wide with an 18mm profile, and the buttons use tactile dome switches with printed icons for each function. The remote includes ON/OFF, SEND (to transmit settings to the sensor), RESET (to restore factory defaults), and TEST (to check sensor response) controls. A five-year warranty covers the remote and its electronic components.

    Specification
    Height 140 mm
    Width 50 mm
    Projection 18 mm
    Construction Polycarbonate
    Finish Black
    Warranty 5
    Downloads

    Product Specification Sheet

    Frequently Asked

    What sensors is this remote compatible with?

    This remote is designed specifically for the Knightsbridge POTHBMS high bay microwave sensor. It will not control other sensor models or brands.

    What range does the remote have?

    The infrared transmitter works at distances up to 10m from the sensor, allowing programming from ground level in most warehouse and industrial installations. Direct line of sight between the remote and the sensor's infrared receiver is required.

    Can multiple sensors be programmed at once?

    Yes. If multiple POTHBMS sensors are within infrared range when you press SEND, they will all receive the same settings. This allows you to programme an entire bay area simultaneously without adjusting each sensor individually.

    What happens if I press RESET?

    The RESET button restores the sensor to Knightsbridge factory default settings (typically 100% brightness, 10-minute hold time, and other standard parameters). Use this when troubleshooting or when taking over a site where previous settings are unknown.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.