PowerMaster 5ft 48W NCF LED Batten - 4,000K Cool White IP65

The PowerMaster 5ft 48W NCF LED batten is a weatherproof linear fitting with an integrated 48W LED module delivering 5,800 lumens at 4,000K cool white. The IP65-rated polycarbonate housing resists dust and water ingress, and the stainless steel mounting clips resist corrosion in damp or coastal environments. The NCF (non-corrosive fittings) designation refers to these clips, which avoid rust in garages, workshops and outdoor covered installations.

Designed for warehouses, workshops, garages, covered loading bays and agricultural outbuildings, the batten provides functional overhead lighting where durability and light output matter more than decorative appearance. The 120-degree beam angle spreads light evenly across work surfaces and walkways without creating hard shadows or hotspots. The 1500mm length suits standard UK workshop and garage ceiling joist spacing.

The integrated LED runs on 230V mains with no external driver needed, simplifying installation onto ceiling or wall surfaces. The flicker-free driver reduces the strobing effect visible in some LED fittings, which is particularly noticeable when tools or machinery move rapidly under the light. At 120 lumens per watt, the batten delivers comparable light output to older 2 x 58W fluorescent battens while drawing 48W, cutting running costs on fittings that operate for extended hours.

The polycarbonate diffuser softens the LED point sources into an even line of light along the 1500mm length. The batten is rated for Zones 3, 2 and 1 (bathrooms outside the direct shower area and outdoor covered zones), but not Zone 0 (inside shower cubicles or areas subject to water jets). The cool white 4,000K colour temperature provides task-focused light that renders detail clearly without the yellow cast of warm-white alternatives.

Is this batten dimmable?

No. The integrated LED driver does not support dimming. The batten operates at full 48W output when powered on.

Can it be used outdoors?

Yes, with limitations. The IP65 rating allows the batten to be used in covered outdoor areas (carports, covered loading bays, barn eaves) where it is protected from direct rain and water jets. It is not suitable for fully exposed outdoor locations with no overhead cover.

What is the NCF designation?

NCF stands for non-corrosive fittings. The stainless steel mounting clips resist rust in damp environments, making the batten suitable for garages, workshops and coastal locations where standard steel clips would corrode over time.

How does the light output compare to fluorescent tubes?

The 5,800lm output at 48W is comparable to a traditional 2 x 58W fluorescent batten (approximately 5,000-6,000lm combined). The LED version draws less power and requires no tube replacements, reducing maintenance and running costs in commercial and industrial settings.