Nardini 3 Light Crystal Chandelier - Chrome & White Faux Leather

The Nardini is a 50cm three-arm chandelier combining white faux leather-covered arms with a polished chrome frame and cut crystal cube accents at each lampholder. The three E14 bulb positions sit at the ends of curved arms that extend from a central chrome column, with each lampholder mounted on a small crystal cube that adds refracted light and texture to the design.

Designed for dining rooms, bedrooms and living spaces with ceiling heights of 2.4m or above, the Nardini pairs decorative and functional lighting. The 500mm diameter fits comfortably over a 4-seater dining table or as a centrepiece in a 3.5-4m bedroom. The drop is adjustable between 520mm and 1520mm on installation, allowing the chandelier to be set at the appropriate height for the ceiling and room use. When fitted with dimmable E14 candle bulbs the chandelier can be adjusted from full output for task lighting to low ambient glow.

The white faux leather covering on each arm is hand-applied and gives a matte, soft-textured finish that contrasts with the high-gloss polished chrome metalwork. The chrome canopy, chain links and fittings reflect light back into the room, while the cut crystal cubes at each lampholder act as small prisms, scattering light when the bulbs are on. The white and chrome palette suits both contemporary and traditional interiors, particularly where a lighter, brighter finish is preferred over brass or darker metal tones.

Is the Nardini dimmable?

Yes, the chandelier is compatible with dimmer switches when fitted with dimmable E14 bulbs. The dimmer control is handled by the bulbs themselves, not the fitting, so you will need to specify dimmable candle bulbs when purchasing separately.

What bulbs does it take?

The Nardini takes three E14 small Edison screw candle bulbs, up to 60W each. Bulbs are sold separately. Most installations use LED candle bulbs between 4-6W at 2700K-3000K warm white for ambient lighting in dining and bedroom settings.

What ceiling height is needed?

The adjustable drop ranges from 520mm minimum to 1520mm maximum. For a dining table the chandelier typically sits 700-900mm above the table surface, which works in rooms with ceiling heights of 2.4m or above. Lower ceilings can accommodate the fitting if the chain is shortened during installation.

How is the white faux leather maintained?

The faux leather covering can be wiped gently with a dry microfibre cloth to remove dust. For light marks a barely-damp cloth is acceptable, but avoid soaking the material. Do not use household spray cleaners or polishes on the leather-covered sections.