Description
The Mercury European converter plug adapts any 2-pin Euro CEE7 plug to a standard UK 3-pin socket, with a built-in 5A fuse for overload protection. The white plastic housing uses a hinged design that opens to accept the European plug pins, then closes to form a complete UK plug profile that fits flush into UK wall sockets and extension leads.
Designed for travellers bringing European devices into the UK and for households using imported electronics, the converter handles low-power devices up to 5A (1,150W at 230V). Typical uses include phone and laptop chargers, electric toothbrushes, shavers, hairdryers rated under 1,000W, and small kitchen appliances such as coffee grinders or hand blenders purchased in Europe. The converter does not alter voltage, so the connected device must already be rated for 230V UK mains.
The slim 45mm depth when plugged in makes the converter suitable for tight spaces behind furniture, under desks, or in multi-socket extension blocks where a bulkier travel adapter would obstruct adjacent sockets. The white finish matches standard UK socket faceplates and blends into neutral wall colours. The converter meets BS5733, BS1363-5 and BSEN50075 safety standards, with the internal 5A fuse providing protection against current surges that exceed the plug's rating.
Frequently Asked
Does this converter change voltage?
No. The converter adapts the physical plug shape from 2-pin Euro to 3-pin UK but does not alter the voltage. The connected European device must already be rated for 230V UK mains voltage or it will be damaged.
What's the maximum wattage it can handle?
The 5A fuse limits the converter to devices drawing up to 1,150W at 230V. Hairdryers, straighteners and travel kettles often exceed this rating, so check the appliance wattage before use.
Can it be used with extension leads?
Yes. The converter plugs into any standard UK 3-pin socket, including wall sockets, extension leads and multi-socket blocks. The slim profile minimises obstruction of adjacent sockets in multi-gang setups.
Is the fuse replaceable?
Yes. The hinged design allows access to the internal 5A fuse, which can be replaced with a standard BS1362 5A fuse if it blows due to an overload event.