Free Delivery on all orders over £99*

Knightsbridge 100 x 50mm Brush Module - White

£599
The RRP is the manufacturer's recommended retail price of the item.
240 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge NETBR4GW is a 100 x 50mm brush module that allows cables to pass through a wall plate while concealing the aperture behind soft nylon bristles. The module fits Knightsbridge's euro-module grid system and uses an ABS housing with a white finish to match standard white wall plates.

Designed for AV installations where HDMI, aerial, ethernet and speaker cables need to run from equipment behind a wall-mounted TV to sockets or devices below, the brush module prevents the gap from being visible when cables are routed through. The bristles part to allow cables through, then close around them to hide the wall cavity behind. This is commonly used to achieve a 'floating TV' look where no visible cables run down the wall surface.

The module measures 100mm wide by 50mm high, equivalent to two standard euro-module widths, and clips into a compatible grid frame or face plate (sold separately). The white ABS construction is rated IP20 for indoor use. The nylon bristles are soft enough to avoid damaging cable jackets but dense enough to provide coverage when multiple cables are routed through the same module.

Important: This module must NOT be used alongside power sockets in the same wall channel or face plate due to the risk of accessible live voltage through the brush opening. It is intended solely for low-voltage signal cables (HDMI, coax, ethernet, speaker wire) and should be installed in a separate back box or trunking run from any mains wiring.

Specification
Height 50 mm
Width 100 mm
Construction ABS
Finish White
IP Rating IP20
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What cables can pass through this brush module?

The module is designed for low-voltage signal cables only: HDMI, coaxial aerial/satellite cables, ethernet (Cat5e/Cat6), speaker wire, and similar AV cables. It must NOT be used for mains power cables or installed in the same wall channel as power sockets.

Does it fit standard UK back boxes?

This is a euro-module insert that clips into a Knightsbridge grid frame or euro-module compatible face plate, which then fits a standard 25mm or 35mm UK back box. The module itself does not mount directly to a back box without the frame.

How many cables can fit through the brushes?

The 100mm width allows 4-6 typical AV cables (HDMI, coax, ethernet) to pass through comfortably, depending on cable diameter. The nylon bristles part around the cables and close the gaps between them.

Can it be painted?

The ABS housing can be painted if needed to match non-white wall finishes, though paint may stiffen the nylon bristles slightly. Mask the bristles themselves during painting to maintain their flexibility.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge NETBR4GW is a 100 x 50mm brush module that allows cables to pass through a wall plate while concealing the aperture behind soft nylon bristles. The module fits Knightsbridge's euro-module grid system and uses an ABS housing with a white finish to match standard white wall plates.

    Designed for AV installations where HDMI, aerial, ethernet and speaker cables need to run from equipment behind a wall-mounted TV to sockets or devices below, the brush module prevents the gap from being visible when cables are routed through. The bristles part to allow cables through, then close around them to hide the wall cavity behind. This is commonly used to achieve a 'floating TV' look where no visible cables run down the wall surface.

    The module measures 100mm wide by 50mm high, equivalent to two standard euro-module widths, and clips into a compatible grid frame or face plate (sold separately). The white ABS construction is rated IP20 for indoor use. The nylon bristles are soft enough to avoid damaging cable jackets but dense enough to provide coverage when multiple cables are routed through the same module.

    Important: This module must NOT be used alongside power sockets in the same wall channel or face plate due to the risk of accessible live voltage through the brush opening. It is intended solely for low-voltage signal cables (HDMI, coax, ethernet, speaker wire) and should be installed in a separate back box or trunking run from any mains wiring.

    Specification
    Height 50 mm
    Width 100 mm
    Construction ABS
    Finish White
    IP Rating IP20
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What cables can pass through this brush module?

    The module is designed for low-voltage signal cables only: HDMI, coaxial aerial/satellite cables, ethernet (Cat5e/Cat6), speaker wire, and similar AV cables. It must NOT be used for mains power cables or installed in the same wall channel as power sockets.

    Does it fit standard UK back boxes?

    This is a euro-module insert that clips into a Knightsbridge grid frame or euro-module compatible face plate, which then fits a standard 25mm or 35mm UK back box. The module itself does not mount directly to a back box without the frame.

    How many cables can fit through the brushes?

    The 100mm width allows 4-6 typical AV cables (HDMI, coax, ethernet) to pass through comfortably, depending on cable diameter. The nylon bristles part around the cables and close the gaps between them.

    Can it be painted?

    The ABS housing can be painted if needed to match non-white wall finishes, though paint may stiffen the nylon bristles slightly. Mask the bristles themselves during painting to maintain their flexibility.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.