Description
The Kara is a 12W LED recessed panel light with a 169mm diameter white polycarbonate rim and an edge-lit opal diffuser. The integrated SMD LED delivers 1080 lumens of 4000K cool white light at 230V, with a 110° beam angle providing even coverage across office ceilings, corridors, kitchens and bathrooms. The 24mm depth and 155mm cut-out diameter suit shallow ceiling voids where traditional downlight cans cannot fit.
Designed for modern commercial and residential installations, the Kara recesses flush into plasterboard ceilings with a minimum 75mm void depth. The edge-lit technology distributes light evenly across the panel surface without visible hotspots or dark rings, and the Class II double-insulated construction allows installation without an earth connection. The panel is dimmable when paired with compatible dimmers — check dimmer compatibility before installation to avoid flicker.
The white polycarbonate construction keeps the fitting lightweight at under 200g, simplifying installation in suspended ceilings and reducing strain on plasterboard fixings. The opal diffuser softens the LED output to reduce glare in task-lit environments, and the 128.87 lm/W efficacy provides functional illumination at a fraction of the running cost of halogen equivalents. The constant current driver is rated to 30,000 hours L70B50, indicating the point at which 50% of units will have degraded to 70% of initial output.
The Kara is compatible with Knightsbridge's EMKIT2L emergency conversion kit (sold separately), which adds a maintained or non-maintained emergency function for fire-safety compliance in commercial installations. The 3-year warranty covers driver failure and premature LED degradation under normal use.
Specification
| Diameter |
169 mm |
| Recessed Depth |
24 mm |
| Minimum Void |
75 mm |
| Cut-out Diameter |
155 mm |
| Construction |
Polycarbonate |
| Finish |
White |
| Class |
II |
| IP Rating |
IP20 |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Opal |
| Lamp Technology |
SMD LED |
| Lamp Included |
Yes |
| Dimmable |
Yes* |
| L70B50 |
30000 |
| Energy Rating (Class) post 2021 SLR |
E |
| Beam Angle |
110 |
| CCT |
4000 K |
| Light Colour |
Cool White |
| Lumens |
1080 lm |
| Lumens (Light Source only) |
1570 lm |
| Wattage |
12 |
| Efficacy |
128.87 lm/W |
| CRI |
>80 |
| Driver Type |
Constant Current |
| Warranty |
3 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
What ceiling void depth is required?
The Kara requires a minimum 75mm ceiling void to accommodate the 24mm recessed depth plus driver housing. The 155mm cut-out diameter suits standard ceiling joist spacing in most UK residential and commercial installations.
Is the Kara dimmable?
Yes, the integrated LED is dimmable when paired with compatible LED dimmers. Dimmer compatibility varies by manufacturer and model — check with your electrician or contact us before installation to avoid flicker or failure to dim smoothly.
Can it be used in bathrooms?
The IP20 rating limits the Kara to dry indoor environments outside bathroom zones requiring IP44 or higher. It can be installed in hallways, landings and dressing rooms adjacent to bathrooms, but not within zones 1, 2 or 3 of the bathroom itself.
What colour temperature is the light?
The Kara emits 4000K cool white light, which sits between neutral white and daylight. This colour temperature suits task-lit environments like offices, kitchens and utility rooms where clarity and alertness are preferred over warm ambient lighting.