Description
This inside 90° connector joins two lengths of lighting track at a right angle, so a run can turn a corner and carry on along the next wall or ceiling line instead of stopping short. It is a compact, L-shaped piece made of polycarbonate, and at just 0.11KG it adds next to nothing to the weight of the run. It fits 3-circuit track. We offer it in Black or White, so you can match the corner to the rest of your track: Black for dark ceilings and moody display schemes, White for a pale ceiling where you want the joint to sit quietly.
It is made for retail and commercial spaces, the shops, showrooms, offices and reception areas where track lighting runs around the edge of a room, frames a window display or follows a counter. Turning the track rather than ending it lets you keep spotlights pointing at stock along two walls from one continuous layout. It suits shopfitters, lighting designers and electrical contractors planning a track scheme, and it works just as well in a home where a track run needs to follow the shape of a kitchen ceiling, a living room or a hallway. It is for indoor use.
Its body is polycarbonate, finished in Black or White, with a connector arm at each end of the L that takes a length of track. Because it is an inside 90° connector, check against your track plan that an inside corner is the one your layout calls for before the run goes up. Like the rest of a mains track system, it is installed by a qualified electrician. It comes with a 5-year warranty, so you can plan a permanent scheme around it with confidence.
Specification
| Dimensions |
101 x 67 x 36mm & 100 x 100 x 32mm |
| Material |
PC |
| Finish |
Black & White |
| Warranty |
5 years |
| Weight |
0.11KG |
Downloads
Specification Sheet - Black
Specification Sheet - White
Installation Instructions
Frequently Asked
Which finishes does this corner connector come in?
We offer it in Black or White, so you can match it to dark or pale track and ceilings in your scheme.
What does an inside 90° connector do?
It joins two lengths of lighting track at a right angle, letting a single track run turn a corner instead of ending there.
What is it made of and how heavy is it?
The body is made of polycarbonate, and the connector weighs 0.11KG, so it adds very little to the weight of your track run.
Can I fit the corner connector myself?
It forms part of a mains track installation, so it should be installed by a qualified electrician rather than fitted yourself.
Is it suitable for shops and commercial interiors?
Yes. It is made for retail and commercial interiors such as shops, showrooms and offices, and it works indoors at home too.