Description
This is an LED outdoor wall light with an integrated LED, so there is no bulb to buy or change. Its rounded, egg-shaped body carries the LED panel on its underside behind a polycarbonate diffuser, sending the light down onto the ground in front of it. Each fitting is set to 6W, 8W, 10W, 12W or 15W when it is installed, giving from 850lm to 2000lm at 127 to 142lm/W, and set to 2700K or 3000K, so you choose a warmer or a slightly cooler warm white for the spot it lights. Colour rendering is CRI above 80. It measures 293mm by 292mm and 97mm deep, and weighs 2.5KG.
Rated IP66, it is dust tight and protected against powerful jets of water, so it is made for an outside wall in all weathers, and its IK10 impact rating means it stands up to hard knocks. We would choose it for lighting a pathway, a side passage, a building entrance or the outside wall beside a door, on homes, offices and commercial premises alike. It is happy working in temperatures from minus 30°C to 50°C. The built in photocell sensor switches it on as daylight fades and off again when it gets light, so it looks after itself all year round.
The body is double powder coated aluminium alloy, with polycarbonate and 316 stainless steel parts, and the LEDs have a rated life of 54,000 hours (L70). It is non-dimmable, so it runs on a plain switched supply rather than a dimmer. Its Emergency feature keeps a light going if the mains supply fails, and it is a manual test type, so whoever looks after the building checks it by hand. It runs on mains power at 220-240V AC as a Class I fitting, mounts on a wall and must be installed by a qualified electrician. It comes with a 5-year warranty.
Specification
| Light Source |
Integrated LED |
| Wattage |
6W, 8W, 10W, 12W or 15W, set at installation |
| Lumens |
850-2000lm |
| Efficacy |
127-142lm/W |
| Colour Temperature |
2700K & 3000K |
| Colour Rendering |
CRI>80 |
| IP Rating |
IP66 |
| Impact Rating |
IK10 |
| Dimming |
Non-Dimmable |
| Emergency |
Manual-Test |
| Sensor |
Photocell |
| Dimensions |
293 x 97 x 292mm |
| Material |
Double Powder Coated ADC12 Aluminium Alloy, PC & Stainless Steel 316 |
| Diffuser |
PC |
| Input Voltage |
220-240V AC |
| Electrical Class |
Class I |
| Rated Life |
54,000 hours (L70) |
| Mounting |
Wall |
| Ambient Temperature |
-30-50°C |
| Warranty |
5 years |
| Weight |
2.5KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
Can I choose the colour of the light?
Yes. Each fitting is set to 2700K or 3000K when it is installed, so your electrician sets the white you want at that point.
How bright is this outdoor wall light?
It gives from 850lm to 2000lm, depending on whether it is set to 6W, 8W, 10W, 12W or 15W when it is installed.
Will it switch itself on at night?
Yes. It has a built in photocell sensor that switches it on as daylight fades and off again when it gets light.
Can it be dimmed?
No. It is non-dimmable, so it should run on a plain switched supply rather than being connected to a dimmer.
Is it suitable for an exposed outside wall?
Yes. It is rated IP66 and IK10, and it works in temperatures from minus 30°C to 50°C, so it suits exposed outdoor walls.